Print…Closures
Supplier:
Ace Glass
Description:
Three-layer flat septa consists of two harder layers of rubber outside, and a softer, silicone rubber layer inside
Catalog Number:
(16219-120)
Supplier:
Thermo Fisher Scientific
Description:
Linerless closures fit NALGENE® Jars 36319-501, 16128-841 series, 16129-306 and -308, 16129-356 and -378
Catalog Number:
(10220-506)
Supplier:
S.C.A.T.
Description:
These caps are mainly used as connection for exhaust filter and electronic level control sensor.
Supplier:
MicroSolv Technology Corp
Description:
These caps are suitable for 8 mm Crimp top Vials.
Catalog Number:
(97056-780)
Supplier:
MicroSolv Technology Corp
Description:
Using this Polypropylene Pouring or 'Drip Ring' can make decanting liquids from any bottle with a GL 45 Thread easier and prevent that last drop from ...
Supplier:
DWK Life Sciences (KIMBLE)
Description:
One-piece center disc tears out, exposing top of seal to syringe
Supplier:
Ace Glass
Description:
This open top red polybutylene teraphthalate (PBT) cap is for use with GL threads
Catalog Number:
(470203-048)
Supplier:
DWK Life Sciences (KIMBLE)
Description:
Polypropylene closures for 13 and 20 mm culture tubes.
Supplier:
Corning
Description:
This cap is fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving.
Supplier:
Corning
Description:
The CentriStar™ cap has a easy-on/easy-off flat top and offers advanced ergonomics with its wider knurls and roll-over edge design for easier gripping...
Supplier:
Thermo Scientific
Description:
Pre-assembled caps with septa. 10-425 thread finish.
Catalog Number:
(97055-428)
Supplier:
MicroSolv Technology Corp
Description:
Light blue with fitted ultra pure silicone/PTFE septa. For use with 9-425mm, 12x32mm AQ vials. AQ brand. 100/pack.
Catalog Number:
(KT953915-0047)
Supplier:
DWK Life Sciences (KIMBLE)
Description:
These Filtration caps made of glass-filled PTFE with a vacuum adapter for 1/4” ID tubing.
Catalog Number:
(66014-780)
Supplier:
DWK Life Sciences (KIMBLE)
Description:
Cap Size: 10-425. Wheaton Screw Top E-Z Vials with Step feature a large opening and a long neck for greater sample accessibility with reduced needle damage. Vial capacity is increased to 1.8mL.
Supplier:
DWK Life Sciences (KIMBLE)
Description:
Poly-seal® PE-cone lined black phenolic screw caps that are ideal for tight sealing, analytical standards, reagents and distilled water.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
 is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||
List View
