Print…
You Searched For:
28 results were found
NS Joint Sleeves and Connectors
Supplier:
VWR International
Description:
These PTFE sleeves withstand low to medium pressure and are inserted between standard ground glass joints to eliminate the use of grease and prevent s...
Supplier:
VWR International
Description:
For grease-free, high-vacuum seals using standard ground glass joints.
Supplier:
Ace Glass
Description:
Standard taper inner ground joints are designed for use with matching outer members of the same size, such as 89059-456, 89059-492, 89059-520, 89060-0...
Supplier:
Ace Glass
Description:
PTFE sleeves are inserted between standard taper ground glass joints
Supplier:
Ace Glass
Description:
The outer diameter of both joint and tube are approximately the same size, allowing for ease in clamping
Supplier:
Ace Glass
Description:
Ground joint standard taper sleeve for greaseless connections
Supplier:
Ace Glass
Description:
Quartz joints available in a variety of sizes both inner and outer members.
Supplier:
Ace Glass
Description:
The outer diameter of joint and tube are approximately the same size, allowing for ease in clamping
Supplier:
Ace Glass
Description:
Interchangeable, full length
Supplier:
Ace Glass
Description:
Fabricated from 18-8 type stainless steel No
Supplier:
Ace Glass
Description:
Recommended for use with PTFE-clad ball member
Catalog Number:
(14007-476)
Supplier:
SP Industries
Description:
Made of PTFE with a nominal thickness of 0.003", these sleeves are fitted onto Standard Taper inner joints to prevent 'freezing' of assembled joints.
Supplier:
Ace Glass
Description:
Designed for use with [ST] inner member regular joints with only a slight mismatch, these PTFE sleeves are treated on the inner surface so that they c...
Supplier:
Ace Glass
Description:
Standard taper inner ground glass joint with a ring on the shank for use with threaded outer member, O-Ring, and cap to form a leak-tight seal
Supplier:
Ace Glass
Description:
Spherical Capillary Joints
Supplier:
Ace Glass
Description:
Standard taper inner ground glass joint with external thread for use with inner member, O-Ring, and cap to form a leak-tight seal
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
 is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||
List View
