Keep your session open?
Ending In 
Your shopping session has expired.
Your session has expired. For your security, we have logged you out.
Would you like to log in again?
  • Product Category
  • Criteria
  • Supplier
    • Suppliers found in search results
    Sort by:
    Close

You Searched For:

Supports

219  results were found
Supports

Supports are designed to hold specific-sized samples and equipment for safe reaction testing procedures. With strong construction, the devices act as protective barriers to keep the benchtop surface and handlers safe from intensely heated samples or harsh solvents. Stands will also precisely position the supplies for specific requirements and allow researchers both hands for maximum working efficiency. The supports give employed instruments the stabilization needed for a controlled and accurate analysis.


SearchPresentationType-SearchPresentationType-SearchPresentationType-SearchPresentationType-VERTICAL
 
 
 
SearchResultCount:"219"
Searching List View List View Easy View 
Sort by:
 
 
 
 

Product Image
Description:   Size 5 tapered collar-type holders support funnels crucibles and more in vacuum-type filtration assemblies. Holders can be used alone or with adjacent sizes. Positive but easy to release gas-tight seal. 35mm high. 58mm top OD. 37mm bottom OD.
Catalog Number: 89259-866
Supplier: VWR International



Quantity:
 
 
 
   
Product Image
Description:   VWR* Neoprene Crucible Holders are tapered, collar-type holders.size 7, They support funnels, crucibles, and other equipment in vacuum-type filtration assemblies. used alone or with adjacent sizes. feature a positive, but easy-to-release gas-tight seal, pack12.
Catalog Number: 10200-148
Supplier: VWR International



Quantity:
 
 
 
   
Product Image
Description:   Size 2 tapered collar-type holders support funnels crucibles and more in vacuum-type filtration assemblies. Holders can be used alone or with adjacent sizes. Positive but easy to release gas-tight seal. 20mm high. 28mm top OD. 16mm bottom OD.
Catalog Number: 89259-860
Supplier: VWR International



Quantity:
 
 
 
   
Product Image
Description:   Size 4 tapered collar-type holders support funnels crucibles and more in vacuum-type filtration assemblies. Holders can be used alone or with adjacent sizes. Positive but easy to release gas-tight seal. 30mm high. 46mm top OD. 28mm bottom OD.
Catalog Number: 89259-864
Supplier: VWR International



Quantity:
 
 
 
   
Product Image
Description:   80mm outside diameter compressed cork rings are designed for supporting flasks or dishes. An internal bevel at the top provides a secure support for round-bottomed vessels. Inside diameter is 32mm.
Catalog Number: 56250-024
Supplier: VWR International


Low Manufacturing Impact Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   Made of sponge rubber in a hexagonal shape to prevent rolling. Center hole sized for standard graduated cylinders. For cylinder type: 250mL.
Catalog Number: 15001-380
Supplier: VWR International


Small Business Enterprise

Quantity:
 
 
 
   
Product Image
Description:   For Large 3 Prong Clamps Pack Of 3.
Catalog Number: 21572-908
Supplier: VWR International


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   For Medium 2 Prong Clamps Pack Of 2.
Catalog Number: 21572-901
Supplier: VWR International


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   (VFLUN) Made of long-lasting green Neoprene rubber. Moderate heat and oil resistance. Concave recess on top supports round-bottom flasks and dishes. Holds 250 and 500mL flasks firmly in place.
Catalog Number: 56255-006
Supplier: VWR International



Quantity:
 
 
 
   
Product Image
Description:   210mm outside diameter compressed cork rings are designed for supporting flasks or dishes. An internal bevel at the top provides a secure support for round-bottomed vessels. Inside diameter is 150mm.
Catalog Number: 56250-104
Supplier: VWR International


Low Manufacturing Impact

Quantity:
 
 
 
   
Product Image
Description:   Size 3 tapered collar-type holders support funnels crucibles and more in vacuum-type filtration assemblies. Holders can be used alone or with adjacent sizes. Positive but easy to release gas-tight seal. 25mm high. 37mm top OD. 22mm bottom OD.
Catalog Number: 89259-862
Supplier: VWR International



Quantity:
 
 
 
   
Product Image
Description:   For Medium 3 Prong Clamps Pack Of 3.
Catalog Number: 21572-907
Supplier: VWR International


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   Replacement Sleeves for Clamps, Medium Two Prong Vinyl Sleeves, Talon, VWR. Pack of 2.
Catalog Number: 21572-900
Supplier: VWR International


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   Made of sponge rubber in a hexagonal shape to prevent rolling. Center hole sized for standard graduated cylinders. For cylinder types: 50 and 100mL.
Catalog Number: 15001-378
Supplier: VWR International


Small Business Enterprise

Quantity:
 
 
 
   
Product Image
Description:   Made of sponge rubber in a hexagonal shape to prevent rolling. Center hole sized for standard graduated cylinders. For cylinder types: 5 and 10mL.
Catalog Number: 15001-374
Supplier: VWR International


Small Business Enterprise

Quantity:
 
 
 
   
Product Image
Description:   Size 6 tapered collar-type holders support funnels crucibles and more in vacuum-type filtration assemblies. Holders can be used alone or with adjacent sizes. Positive but easy to release gas-tight seal. 40mm high. 70mm top OD. 46mm bottom OD.
Catalog Number: 89259-868
Supplier: VWR International



Quantity:
 
 
 
   
Items Per Page: 16  32  64 
1 - 16  of 219
  1  2  3  4  5  6  7  8  9  10  11  12  13  14  Next