Keep your session open?
Ending In 
Your shopping session has expired.
Your session has expired. For your security, we have logged you out.
Would you like to log in again?

Due to maintenance activity, Global web site will not be available from 6AM till 2PM ET on 20th April 2024.

  • Criteria
      • SBE (9)
  • Supplier
    • Suppliers found in search results
    Sort by:
    Close

You Searched For:

TLC Development Tanks

38  results were found
TLC Development Tanks

TLC development tanks are constructed of sturdy glass with beveled edges to eliminate sharp hazards. Clear sides offer an unobstructed view of the developing tank contents. Different tanks are available with lids in a variety of styles, including latch, nonslip, and standard variants. Plate size compatibility varies between different models, with development tanks offered in both rectangular and cylindrical formats with varied internal dimensions. Some rectangular models feature a raised edge along the inside bottom to allow for the simultaneous development of two plates.


SearchPresentationType-VERTICAL
 
 
 
SearchResultCount:"38"
Searching List View List View Easy View 
Sort by:
 
 
 
 

Product Image
Description:   Size: 75mm x 125mm. Heavy wall borosilicate glass round tank. Can accommodate plate sizes up to 5cm x 10 cm. Supplied with [ST] 60/21 ground glass stopper.
Catalog Number: 14205-084
Supplier: SP Industries



Quantity:
 
 
 
   
Product Image
Description:   Plate Width x Length: 25mm x 75mm; Approxiamte Height: 95mm. Glass cylindrical developing chambers with flat bottom and molded plastic caps.
Catalog Number: 14201-742
Supplier: SP Industries



Quantity:
 
 
 
   
Product Image
Description:   Plate Width x Length: 50mm x 100mm; Approxiamte Height: 120mm. Glass cylindrical developing chambers with flat bottom and molded plastic caps.
Catalog Number: 14207-016
Supplier: SP Industries



Quantity:
 
 
 
   
Product Image
Description:   Latch Lid-Tank, Complete. Heavy duty, molded TLC developing tank for use with plates up to 20x20cm (8in.x8in.). The weight of the tank is approximately 15 pounds and the bottom is ground to insure stability.
Catalog Number: 80060-612
Supplier: Chemglass


Small Business Enterprise

Quantity:
 
 
 
   
Product Image
Description:   Cylindrical glass tank for the development of 5x20cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with glass lid.
Catalog Number: KT416170-0520
Supplier: DWK Life Sciences (KIMBLE)



Quantity:
 
 
 
Certificate Certificates    
Product Image
Description:   Cylindrical glass tank for the development of 2.54x7.6cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with polyethylene lid.
Catalog Number: KT416170-1119
Supplier: DWK Life Sciences (KIMBLE)



Quantity:
 
 
 
   
Product Image
Description:   Heavy glass construction. Stainless steel latching device holds the ground glass surfaces of the lid and tank firmly in place. Interior dimensions: 27Lx7Dx27Hcm. Includes glass developing tank, latch-lid with hardware, equilibration latch-lid and multiplate rack.
Catalog Number: 21432-706
Supplier: General Glass Blowing



Quantity:
 
 
 
   
Image Unavailable
Catalog Number: 21432-835
Supplier: General Glass Blowing



Quantity:
 
 
 
   
Product Image
Description:   TLC Tank, Complete. Heavy duty molded TLC developing tank for use with plates up to 20x20cm (8in.x8in.). The weight of the tank is approximately 15 pounds, and the bottom is ground to insure stability. Inside dimensions of the tank are 27cm widex7cm deepx26cm high (10 5/8in.
Catalog Number: 80060-616
Supplier: Chemglass


Small Business Enterprise

Quantity:
 
 
 
   
Product Image
Description:   Use with Plate Size W x H (mm); 10 x 20 TLC Developing Tank, "Shorty" Manufactured from sturdy molded glass bricks with clear sides allowing unobstructed visual inspection if TLC plated up to 20 x 20 cm in size.
Catalog Number: KT416180-1020
Supplier: DWK Life Sciences (KIMBLE)



Quantity:
 
 
 
   
Image Unavailable
Description:   Heavyweight construction and ground flat bottom. Top lip of tank is also ground flat and beveled inside and outside to eliminate any sharp edges. Lid has handle for easy removal. Six-plate aluminum rack fits snugly in tank. Tank is 8.6cm in depth. Size: 10cm.
Catalog Number: 21432-841
Supplier: General Glass Blowing



Quantity:
 
 
 
   
Product Image
Description:   Replacement Latch-Lid Only. Heavy duty, molded TLC developing tank for use with plates up to 20x20cm (8in.x8in.). The weight of the tank is approximately 15 pounds and the bottom is ground to insure stability.
Catalog Number: 80060-614
Supplier: Chemglass


Small Business Enterprise

Quantity:
 
 
 
   
Image Unavailable
Catalog Number: 21432-834
Supplier: General Glass Blowing



Quantity:
 
 
 
   
Product Image
Description:   Sturdy, molded, clear-glass block. Develop two 20x20cm plates or equivalent simultaneously without rack. Chamber capacity approximately 4.2L. Inside dimensions: 27Lx7.5Wx26Hcm. Includes flat glass lid.
Catalog Number: 21432-739
Supplier: General Glass Blowing



Quantity:
 
 
 
   
Product Image
Catalog Number: 21432-336
Supplier: General Glass Blowing



Quantity:
 
 
 
   
Product Image
Description:   Cylindrical glass tank for the development of 5x10cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with polyethylene lid.
Catalog Number: KT416170-1120
Supplier: DWK Life Sciences (KIMBLE)



Quantity:
 
 
 
Certificate Certificates    
Items Per Page: 16  32  64 
1 - 16  of 38
  1  2  3  Next