Drying Tubes
Supplier:
VWR International
Description:
Ideal for drying gases, these polyethylene drying tubes have two push-on ends for easily filling with drying agents.
Supplier:
Glassco
Description:
Angled gooseneck-type drying tube features a dessicant area that is 140 mm in length.
Supplier:
Bel-Art Products, a Part of SP
Description:
Drying tubes with tube fittings can be filled with desiccant of choice.
Supplier:
Ace Glass
Description:
Desiccant section is approximately 100 mm (3¹⁵/₁₆") long.
Catalog Number:
(89074-486)
Supplier:
Ace Glass
Description:
This drying tube adapter has an inner standard taper joint, and comes complete with rubber stopper and ¼×2" tube.
Supplier:
Ace Glass
Description:
Length indicated below is measured fromthe top of joint to the bottom of curve.
Catalog Number:
(80093-774)
Supplier:
DWK Life Sciences (KIMBLE)
Description:
Constructed of Wheaton 33® low extractable borosilicate glass.
Supplier:
Ace Glass
Description:
Microscale drying tube is designed to protect moisture sensitive reaction components from atmospheric water vapor while allowing a reaction system to ...
Supplier:
Ace Glass
Description:
Bent gooseneck-type drying tube features a dessicant area that is 140 mm in length.
Catalog Number:
(89091-576)
Supplier:
Corning
Description:
Drying tube is a replacement part for the 6949M series of PYREX® microchemistry kits.
Catalog Number:
(32638-918)
Supplier:
Corning
Description:
Drying tube is a replacement part for the 6949M series of PYREX® Microchemistry kits.
Catalog Number:
(89091-578)
Supplier:
Corning
Description:
Made of PYREX® borosilicate glass.
Catalog Number:
(KT746095-0000)
Supplier:
DWK Life Sciences (KIMBLE)
Description:
This drying tube is used with an unsealed system to protect moisture-sensitive reactions from the atmosphere.
Catalog Number:
(KT562500-2440)
Supplier:
DWK Life Sciences (KIMBLE)
Description:
U-shaped drying tube.
Supplier:
Chemglass
Description:
Tubes feature a [ST] lower inner joint and include a rubber stopper and glass inlet tube.
Catalog Number:
(KT746090-0000)
Supplier:
DWK Life Sciences (KIMBLE)
Description:
Glassware manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||