Adapters, Joints with Tube Connectors
Supplier:
DWK Life Sciences (KIMBLE)
Description:
Adapters allow interfacing between outer Standard Taper jointed glassware with threaded microscale components.
Supplier:
DWK Life Sciences (KIMBLE)
Description:
Vacuum filtration adapters with hose connection is used for reduced pressure filtration using plain stem buchner funnels.
Supplier:
DWK Life Sciences (KIMBLE)
Description:
Designed for use as a vent or for the introduction of vacuum or pressure.
Supplier:
DWK Life Sciences (KIMBLE)
Description:
BEVEL-SEAL™ Inlet Adapters are designed for use with plain thermometers, pipets, syringes, or other small items with an O.D. from 2 to 17mm.
Supplier:
DWK Life Sciences (KIMBLE)
Description:
Adapter has a 170-220 micron porosity disc between the hose connection and the inner joint.
Supplier:
Ace Glass
Description:
When inserted into a flask, this rotary evaporator “splash guard” adapter combines with flask neck to give the best protection against a splash-up.
Supplier:
Ace Glass
Description:
This multipack contains seven chemically inert PTFE adapters with Ace-Thred and GPI vial inner thread, plus one glass conversion adapter.
Supplier:
Ace Glass
Description:
These glass adapters are used to connect freeze drying vessels to the rubber valves on Virtis, Labconco, and most other commercially available freeze ...
Supplier:
Ace Glass
Description:
Aadapters are designed for reduced pressure filtration with plain-stem Buchner funnels.
Catalog Number:
(62955-008)
Supplier:
Corning
Description:
These PYREX® angle connecting adapters have a sidearm at an approximately 120° angle from the lower joint.
Supplier:
Ace Glass
Description:
This adapter features a hose connection at one end.
Supplier:
Ace Glass
Description:
This adapter has NPT threads on both ends.
Supplier:
Kemtech America
Description:
This inlet adapter features a hose connection, vacuum take-off and drip tip.
Supplier:
Ace Glass
Description:
This adapter features a ground inner standard taper joint for adapting thermocouples into jointed heads.
Catalog Number:
(89062-926)
Supplier:
Ace Glass
Description:
This thermometer adapter is made of PTFE with a knurled nut to adapt standard chemical thermometers.
Supplier:
Ace Glass
Description:
This connecting adapter comes with standard taper or spherical joints.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||