Print…Funnels
Supplier:
VWR International
Description:
VWR® Squibb Seperating funnels are made from Borosilicate 3.3 glass, ASTM 438, Type 1, Class A standard
Supplier:
VWR International
Description:
These sterile, wide stem funnels are ideal for transferring powders or granules using a sterile sampling tool into a sterile container.
Supplier:
VWR International
Description:
Funnels comes with short, wide stem, and are useful for adding powder chemical to reaction vessels.
Supplier:
VWR International
Description:
VWR® Graduated Addition/Dropping funnels with PTFE Stopcocks are made from Borosilicate 3.3 glass, ASTM 438, Type 1, Class A standard.
Supplier:
VWR International
Description:
Polypropylene funnels are steam autoclavable at 121°C (250°F).
Catalog Number:
(89305-304)
Supplier:
VWR International
Description:
VWR® disposable paper lab funnels are a simple and cost-effective solution to reduce plastic use in the lab and reduce cross-contamination from reuse ...
Supplier:
VWR International
Description:
Polypropylene funnels feature a 60° body angle and 58° internal rib angle for rapid filtration.
Catalog Number:
(470307-012)
Supplier:
Heathrow Scientific
Description:
Paper funnel for clean transfer every time.
Supplier:
VWR International
Description:
These chemical-porcelain Buchner filter funnels feature a fixed perforated plate and glazing inside and out, except for the rim.
Supplier:
VWR International
Description:
Ideal for use where filter paper or membranes cannot withstand chemical attack of the filtrate.
Supplier:
VWR International
Description:
Polypropylene analytical funnels feature a 60° body angle and 58° internal rib angle for rapid filtration.
Supplier:
VWR International
Description:
Funnels are semi-transparent and are provided in a variety of stem lengths for varied pouring purposes.
Supplier:
VWR International
Description:
These chemical-porcelain funnels feature a fixed perforated plate and glazing inside and out, except for rim.
Supplier:
VWR International
Description:
Foxx's stainless steel safety funnel has overfill protection that will prevent spillage of liquid during filling, and the attached lid helps trap harm...
Supplier:
VWR International
Description:
Isostatically molded, FDA approved pure PTFE molding provides a durable, heavy wall construction with a smooth, non-stick internal finish.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
 is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||
List View
