Print…
You Searched For:
80 results were found
Lids
Supplier:
SP Industries
Description:
Featuring a center neck and three side necks with full length outer Standard Taper joints that are 120° apart, these borosilicate glass reaction vesse...
Supplier:
Ace Glass
Description:
Low-form heads with several female NPT openings
Catalog Number:
(14209-204)
Supplier:
SP Industries
Description:
Featuring a center neck and two side necks with full-length outer Standard Taper joints, these borosilicate glass three-neck reaction vessel lids/cove...
Catalog Number:
(14208-482)
Supplier:
SP Industries
Description:
Featuring a center neck and two side necks with full length outer Standard Taper joints, these borosilicate glass 3-neck reaction vessel lids/covers h...
Catalog Number:
(89054-980)
Supplier:
Ace Glass
Description:
Standard 4-inch (100mm) head with three socket joints in line, plus a standard taper 14/35 side joint for thermometer
Supplier:
AZENTA US, INC
Description:
Purple lid for CryoPod carriers
Catalog Number:
(89134-412)
Supplier:
Corning
Description:
With 24/29 Standard Taper Stopcock. They Require A Replacement 24/29 Standard Taper Stopcock With A Tooled Hose Connection. The Plug Material Is Ptfe.
Supplier:
Sklar
Description:
The SklarLite™ Mid Size Rigid Sterilization Container Lids are available in a variety of colors.
Supplier:
Sklar
Description:
Sklar's Instrument Tray Covers are seamless to prevent bacterial growth.
Supplier:
JULABO
Description:
Condensation trap bath tank lid. Reduces/eliminates moisture condensation in bath fluid at <10 °C operation. Lid locks in place with fluid fill po...
Supplier:
Sklar
Description:
Instrument Tray Cover, Stainless Steel, Reusable, Latex-Free, for 16 1/2x 10x 2 1/2inch Instrument Tray
Supplier:
QLA
Description:
QLA manufactures a wide selection of vessel covers for most dissolution testers.
Supplier:
Thermo Scientific Chemicals
Description:
Zirconium Cover for 250 mL Low Form Zirconium Crucible
Catalog Number:
(76333-376)
Supplier:
Chemglass
Description:
Reaction vessel lid is constructed of ¹/₄" thick #316 S.S. with a ¹/₈" thick PTFE gasket underneath. The only material exposed to the reaction is PTFE...
Supplier:
Chemglass
Description:
These three neck reaction vessel lids have a flat ground surface allowing it to be greased or used with an o-ring.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
 is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||
List View
