Test/Sample Tube Closures
Supplier:
Globe Scientific
Description:
CT™ flange plug caps have extremely high tolerances and are specifically designed for use with CapTrack™ systems.
Supplier:
Chemglass
Description:
Thread Size: 15-425; Liner Type: Rubber. Cap for use with CG-190 G.P.I. screw thread tube. Part numbers CG-191-01 through CG-191-12 are made of black plastic with a choice of white rubber or fluoropolymer resin liner.
Supplier:
Simport Scientific
Description:
Dual position caps are suitable for use in both aerobic and anaerobic procedures.
Supplier:
Globe Scientific
Description:
These polyethylene plug caps are available in a selection of colors to facilitate sample identification.
Supplier:
Chemglass
Description:
Solid SVL® caps with PTFE faced liner.
Supplier:
Starplex
Description:
Nonsterile polyethylene plug style caps are designed for use with 5mL and 10mL vials
Supplier:
Globe Scientific
Description:
These polyethylene flanged plug caps provide exceptional leak-resistance in 13 mm test tubes, centrifuge tubes, and round cuvettes.
Supplier:
Chemglass
Description:
Made from polyethylene, these caps are sized to fit 5mm O.D
Supplier:
Chemglass
Description:
Strainer Cap Only for FlowTubes, with 35um Nylon Mesh, Sterile, designed to assist in cell sorting/straining applications
Supplier:
Greiner Bio-One
Description:
Snap caps are suitable for recapping all 13mm VACUETTE® tubes.
Supplier:
Globe Scientific
Description:
Polyethylene flanged plug caps provide exceptional leak-resistance in test tubes, centrifuge tubes, and round cuvettes
Catalog Number:
(30620-274)
Supplier:
Dynalon
Description:
Cuvette caps, polyethylene dust covers fit most standard cuvettes.
Supplier:
Chemglass
Description:
The silicone sponge closure is manufactured with a sealed in .2 micron silicone sponge filter
Supplier:
Globe Scientific
Description:
Dual Position Closure Cap
Supplier:
Simport Scientific
Description:
Plug-type push-in polyethylene caps are designed for test tubes with an outside diameter of 12 mm. The 17 mm caps are designed for T408 centrifuge tub...
Catalog Number:
(10746-530)
Supplier:
Globe Scientific
Description:
This plug cap is designed for use on the Beckman Coulter IDS Specimen Automation Track (2nd Generation)
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||