ACE GLASS, INC.
Supplier:
Ace Glass
Description:
PTFE packing for use in stuffing boxes
Supplier:
Ace Glass
Description:
Use Ace-Thred adapters to mate glass or PTFE (stainless steel core) baffles to any standard taper joint
Supplier:
Ace Glass
Description:
Low Vacuum Stirrer Bearings are designed for use in applications to below 3 Torr.
Catalog Number:
(89077-990)
Supplier:
Ace Glass
Description:
These Stirrer Magnets can be used in place of overhead mechanical stirring, in many cases, with equal or better agitation
Supplier:
Ace Glass
Description:
Motor and controller, motor is non-reversible, 1/12 hp DC, 5/16" dia shaft 1" long
Supplier:
Ace Glass
Description:
This self-aligning, lubricant-free PTFE Trubore® glass and PTFE bearing is designed for use with stainless steel or glass 10 mm stirring shafts
Supplier:
Ace Glass
Description:
This glass bearing is supplied with tubulation for feeding inert gases around the bearing to balance any pressure possibly being developed in the flas...
Supplier:
Ace Glass
Description:
This is a coated steel flex-beam connector, for attaching directly to stir motor drive shaft.
Supplier:
Ace Glass
Description:
This stirrer magnet is a 10 mm diameter pick-up rod with a powerful Alnico magnet sealed in one end and handy hang-up rip on the other.
Supplier:
Ace Glass
Description:
Wedge-shaped PTFE magnetic stir bars are designed to “plow” up sediment for thorough dispersion
Supplier:
Ace Glass
Description:
This precision Trubore® stirrer assembly consists of 10mm I.D
Catalog Number:
(89075-076)
Supplier:
Ace Glass
Description:
Precision ground glass stirring shaft, 10 mm O.D., attached vanes
Catalog Number:
(89075-084)
Supplier:
Ace Glass
Description:
Precision ground, hollow, 5 mm glass stirring shaft
Supplier:
Ace Glass
Description:
This self-aligning, lubricant-free PTFE Trubore® glass and PTFE bearing is designed for use with stainless steel or glass 6 mm stirring shafts
Supplier:
Ace Glass
Description:
Precision PTFE covered stainless steel stirring shafts, 19 mm O.D
Catalog Number:
(89075-074)
Supplier:
Ace Glass
Description:
Precision ground glass stirring shaft with attached vanes, 10 mm
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||