Corning
Supplier:
Corning
Description:
These caps are compatible with all Axygen Scientific screw top microcentrifuge tubes, including both skirted and nonskirted variations of the 0.5 ml, ...
Supplier:
Corning
Description:
These reusable Corning® caps are fabricated specially formulated phenolic resin to resist the effects of temperature and steam in autoclaving
Catalog Number:
(62890-448)
Supplier:
Corning
Description:
Red polybutylene terephthalate (PBT) GL45 screw cap has three 6.4mm (1/4") holes at top for use with 3.2mm (1/8<...
Supplier:
Corning
Description:
Disposable transfer caps are for use with plastic Erlenmeyer flasks (see 29152-146 series)
Supplier:
Corning
Description:
These disposable Corning® spinner flask aseptic transfer caps will both reduce contamination and enhance the productivity of your cell culture operati...
Supplier:
Corning
Description:
These Corning® polypropylene closures are designed for culture tubes and flasks.
Supplier:
Corning
Description:
These disposable Corning® caps are made from phenolic resin and are autoclavable at 121°C
Supplier:
Corning
Description:
The 120 mm Center Cap Assembly for Corning® Spinner Flasks is designed for use with direct overhead drive motor.
Catalog Number:
(89089-662)
Supplier:
Corning
Description:
Linerless orange cap has GLS80 thread and is autoclavable at 121°C (250°F).
Supplier:
Corning
Description:
The CentriStar™ cap has a easy-on/easy-off flat top and offers advanced ergonomics with its wider knurls and roll-over edge design for easier gripping...
Supplier:
Corning
Description:
These blue caps provide an economical closure for certain volumetric flasks (see 29610-004 and -285 series).
Supplier:
Corning
Description:
Axygen® mini tube systems are available in 8-cap or 12-cap strip format.
Catalog Number:
(89089-690)
Supplier:
Corning
Description:
The red Corning® polybutylene terephthalate (PBT) high temperature caps have a GL32 thread, and can be dry heat sterilized at up to 180 °C
Supplier:
Corning
Description:
120 mm center cap assembly for Proculture® Spinner Flasks.
Supplier:
Corning
Description:
This cap is fabricated of a resin specially formulated to resist the effects of temperature and steam in autoclaving.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||