Keep your session open?
Ending In 
Your shopping session has expired.
Your session has expired. For your security, we have logged you out.
Would you like to log in again?
  • Product Category
  • Criteria
  • Supplier
  • Suppliers found in search results
    Sort by:

You Searched For:

LABCONCO CORPORATION

110  results were found

SearchPresentationType-SearchPresentationType-SearchPresentationType-SearchPresentationType-SearchPresentationType-VERTICAL
 
 
 
SearchResultCount:"110"
Searching List View List View Easy View 
Sort by:
 
 
 
 

Product Image
Description:   Includes copper outlet tubing, brass valve, knob and hose connector. EA.
Catalog Number: 89260-096
Supplier: Labconco


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   Black solid epoxy, 48inch w x 36inch l x 1.25inch thick. Includes left rear cutout, cupsink and cupsink cover. EA.
Catalog Number: 89260-074
Supplier: Labconco


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   At 60 fpm and sash fully open, uses only 560 CFM. Powder-coated steel exterior. Composite panel liner. 37.5inch high unobstructed sightline. L and R GFCI. . EA.
Catalog Number: 89260-060
Supplier: Labconco


Energy Efficient
Sustainable Materials Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   Includes copper outlet tubing, brass valve, knob and hose connector. EA.
Catalog Number: 89260-106
Supplier: Labconco


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   Nominal width: 0.9m. Exterior: 91.4Wx73.2Dx57.8Hcm. Total exhaust: 145cfm (at 80fpm). Deep 58.4cm interior for equipment including balances. Glacier white, epoxy-coated enclosure with aluminum frame and 0.48cm thick tempered safety glass top and side walls.
Catalog Number: 82010-738
Supplier: Labconco


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   Dual hinge. Manual-closing doors. Safely stores and vents solvents and other highly flammable liquids. Dual-wall white epoxy-coated steel construction with 3.8cm air gap, and fiberglass insulation for complete protection. 90Hx80Wcm. Meets OSHA and NFPA.
Catalog Number: 46610-458
Supplier: Labconco


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   Dual hinge. Support Labconco* laboratory hoods and can be used for storage of small laboratory instruments. Includes one 20.3cm filler panel to increase cabinet’s overall depth from 55.9cm to 76.2cm for installation flush to wall. 90Hx80Wcm.
Catalog Number: 46610-462
Supplier: Labconco


Product available on GSA Advantage®

Quantity:
 
 
 
   
Vendor Image
Description:   Used with Labconco Storage Cabinets to extend cabinet depth and to enclose the utility chase behind the cabinet. Shipping weight 13 pounds. EA.
Catalog Number: 89238-198
Supplier: Labconco


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   At 100 fpm and sas fully open, uses 1640 CFM. Powder-coated steel exterior. Molded one piece fiberglass liner. By-pass block. 37.5inch sightline. Sash stop at 18inch. L and R GFCI. . EA.
Catalog Number: 89260-056
Supplier: Labconco


Energy Efficient
Sustainable Materials Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   At 60 fpm and sash fully open, uses only 960 CFM. Powder-coated steel exterior. Composite panel liner. 37.5inch high unobstructed sightline. L and R GFCI. . EA.
Catalog Number: 89260-064
Supplier: Labconco


Energy Efficient
Sustainable Materials Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Catalog Number: 77296-330
Supplier: Labconco


New Product

Quantity:
 
 
 
   
Product Image
Description:   Telescoping Base Stand For Purifier* Delta* Series Class Ii Type A2 With Biological Safety Cabinets. Dimensions 62.5Iinx29Inx27.5, 5 ft Wide.
Catalog Number: 89003-088
Supplier: Labconco


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   For laboratory fume hoods. For low to moderately corrosive applications. Phenolic-coated impeller. Corrosion-resistant housing. Belt-driven with adjustable sheave. RPM range: 1073-1456. Inlet size: 23.3cm ID. Outlet: 25.4Wx14Lcm. Horsepower: 1/2. 530 to 970cfm. 115V, 60Hz.
Catalog Number: 82006-746
Supplier: Labconco


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   For laboratory fume hoods. For low to moderately corrosive applications. Phenolic-coated impeller. Corrosion-resistant housing. Belt-driven with adjustable sheave. RPM range: 929-1260. Inlet size: 23.3cm ID. Outlet: 25.4Wx14Lcm. Horsepower: 1/3. 430 to 850cfm. 115V, 60Hz.
Catalog Number: 82006-744
Supplier: Labconco


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Description:   For laboratory fume hoods. For low to moderately corrosive applications. Phenolic-coated impeller. Corrosion-resistant housing. Belt-driven with adjustable sheave. RPM range: 550-1380. Inlet size: 31.1cm ID. Outlet: 34.3Wx17.8Lcm. Horsepower: 1/2. 550 to 1380cfm. 115V, 60Hz.
Catalog Number: 82006-750
Supplier: Labconco


Product available on GSA Advantage®

Quantity:
 
 
 
   
Product Image
Catalog Number: 89004-458
Supplier: Labconco


Product available on GSA Advantage®

Quantity:
 
 
 
   
Items Per Page: 16  32  64 
1 - 16  of 110
  1  2  3  4  5  6  7  Next