Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
The Equipment & Instrument Service Team’s focus is to provide comprehensive service solutions for our customers. We provide validation, calibration, preventative maintenance, and extended warranties on all equipment & instruments in and around the laboratory.
Placing vacuum traps between an apparatus and vacuum source establishes a safe and controlled working system. The glassware protects the pump from the separated solvents while simultaneously preventing vapors from being emitted back into the system. Vacuum traps in reservoir, one piece, or two piece styles also guarantee that personnel will not be exposed to gases produced that could be harmful. Standard sized inlet and outlet stems can snugly fit regular stoppers.
Description:
Joint size: Lower Inner Joint: 14/20. Trap has a extra coarse fritted disc sealed between the lower inner and top outer joint to prevent contents of the flask from entering into the condenser in the event of bumping.
Description:
500ml. Joint size: Lower Inner Joint: 24/40. Similar to CG-1320, but with the addition of two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.
Description:
250ml. Joint size: Lower Inner Joint: 29/42. Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask to be drawn into the condenser in the event of 'bumping.
Description:
Replacement Components. Trap, Stopper Portion Only. Two piece trap is constructed using a 57mm O-ring flat flange. Lower trap body is 57mm O.D. x 300mm in length to be used with a 4300ml dewar flask (CG-1593-05 or CG-1594- 05).
Description:
250ml. Joint size: Lower Inner Joint: 24/40. Trap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser.
Description:
100ml. Joint size: Lower Inner Joint: 14/20. Similar to CG-1320, but with the addition of two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.
Description:
250ml. Joint size: Lower Inner Joint: 14/20. Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask to be drawn into the condenser in the event of 'bumping.
Description:
100ml. Joint size: Lower Inner Joint: 14/20. Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask to be drawn into the condenser in the event of 'bumping.
Description:
30mm OD x 225mm L. O-ring joint provides a vacuum tight, grease free seal. Serrated hose connections are 13.5mm at the smallest serration and 15.5mm at the largest serration. Supplied with a stopper, lower body, viton* o-ring, and s.s. pinch clamp.
Description:
100ml. Joint size: Lower Inner Joint: 24/40. Trap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser.
Description:
Two-piece construction. Inlet and outlet are 180[degree] apart for installation. Stopper has standard taper inner joint; body has outer joint. Hose connections OD: 13mm (smallest serration); 16mm (largest serration). Body ODxLength: 54x275mm. Joint size: 50/50.
Description:
250ml. Joint size: Lower Inner Joint: 14/20. Similar to CG-1320, but with the addition of two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.
Description:
Two-piece construction. Inlet and outlet are 180[degree] apart for installation. Stopper has standard taper inner joint; body has outer joint. Hose connections OD: 13mm (smallest serration); 16mm (largest serration). Body ODxLength: 45x250mm. Joint size: 40/50.
Description:
Two-piece construction. Inlet and outlet are 180[degree] apart for installation. Stopper has standard taper inner joint; body has outer joint. Hose connections OD: 13mm (smallest serration); 16mm (largest serration). Body ODxLength: 32x200mm. Joint size: 29/42.
Description:
58mm OD x 275mm L. O-ring joint provides a vacuum tight, grease free seal. Serrated hose connections are 13.5mm at the smallest serration and 15.5mm at the largest serration. Supplied with a stopper, lower body, viton* o-ring, and s.s. pinch clamp.
Description:
Joint size: Lower Inner Joint: 29/42. Trap has a extra coarse fritted disc sealed between the lower inner and top outer joint to prevent contents of the flask from entering into the condenser in the event of bumping.
Description:
100ml. Joint size: Lower Inner Joint: 24/40. Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask to be drawn into the condenser in the event of 'bumping.
Description:
Replacement Components. Main Trap Stopper Assembly (C). Dual trap assembly for use with AF-0060 or AF-0061 manifolds. Pre-trap (B) is 51mm O.D.
Description:
Vacuum Trap Complete. Body O.D.xLength: 75x300mm; O.D. of Inner Tube: 30mm. Joint size: 71/60. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.
Description:
100ml. Joint size: Top Outer Joint: 24/40; Lower Inner Joint: 24/40. Trap is designed to eliminate hold up common to the round style of rotary evaporator traps.
Description:
Two-piece construction. Inlet and outlet are 180[degree] apart for installation. Stopper has standard taper inner joint; body has outer joint. Hose connections OD: 13mm (smallest serration); 16mm (largest serration). Body ODxLength: 38x225mm. Joint size: 34/45.
Description:
250ml. Joint size: Top Outer Joint: 24/40; Lower Inner Joint: 24/40. Trap is designed to eliminate hold up common to the round style of rotary evaporator traps.
Description:
Complete Trap. Body O.D.xLength: 38X225mm; O.D. of Side and Inner Tubes: 13mm. Joint size: 34/45. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.
Description:
500ml. Joint size: Lower Inner Joint: 29/42. Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask to be drawn into the condenser in the event of 'bumping.