Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
Inert NS joint sleeves and connectors join laboratory pieces using different methods to allow the transference of even harsh gases and liquids. While sleeves are often used for straight horizontal or vertical joining, L-shaped connectors offer more positioning flexibility. Without needing routine greasing, the lack of residue will leave tests uncontaminated. Both NS joint sleeves and connectors feature sealing rings that provide the most secure fit available.
Description:
I.D; 40mm; Tube O.D; 45mm. O-Ring Size: 226; Clamp Size: 65. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Description:
I.D; 7mm; Tube O.D; 10mm. O-Ring Size: 111; Clamp Size: 18. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Description:
CUT DRIP JOINTS. Joint size: 24/40. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
UN-CUT DRIP JOINTS. Joint size: 10/30. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
I.D; 15mm; Tube O.D; 20mm. O-Ring Size: 116; Clamp Size: 28. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Description:
CUT DRIP JOINTS. Joint size: 45/50. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
UN-CUT DRIP JOINTS. Joint size: 45/50. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
Joint size: 29/42. A.002in. thick fluoropolymer resin sleeve for standard taper joints provides a grease-free seal. Sold in packages of 3 each.
Description:
UN-CUT DRIP JOINTS. Joint size: 19/22. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
UN-CUT DRIP JOINTS. Joint size: 55/50. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
UN-CUT DRIP JOINTS. Joint size: 29/42. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
CUT DRIP JOINTS. Joint size: 55/50. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
I.D; 75mm; Tube O.D; 80mm. O-Ring Size: 341; Clamp Size: 102. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Description:
I.D; 5mm; Tube O.D; 8mm. O-Ring Size: 110; Clamp Size: 12. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Description:
I.D; 12mm; Tube O.D; 16mm. O-Ring Size: 116; Clamp Size: 28. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Description:
CUT DRIP JOINTS. Joint size: 19/22. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
I.D; 25mm; Tube O.D; 30mm. O-Ring Size: 217; Clamp Size: 35. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Description:
UN-CUT DRIP JOINTS. Joint size: 24/40. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
Joint size: 45/50. A.002in. thick fluoropolymer resin sleeve for standard taper joints provides a grease-free seal. Sold in packages of 3 each.
Description:
CUT DRIP JOINTS. Joint size: 29/42. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
CUT DRIP JOINTS. Joint size: 14/20. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
UN-CUT DRIP JOINTS. Joint size: 71/60. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
UN-CUT DRIP JOINTS. Joint size: 19/38. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
I.D; 20mm; Tube O.D; 25mm. O-Ring Size: 214; Clamp Size: 35. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Description:
I.D; 30mm; Tube O.D; 35mm. O-Ring Size: 223; Clamp Size: 50. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Description:
I.D; 9mm; Tube O.D; 12mm. O-Ring Size: 112; Clamp Size: 18. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Description:
UN-CUT DRIP JOINTS. Joint size: 14/20. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
UN-CUT DRIP JOINTS. Joint size: 50/50. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
UN-CUT DRIP JOINTS. Joint size: 34/45. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
CUT DRIP JOINTS. Joint size: 34/45. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
I.D; 50mm; Tube O.D; 58mm. O-Ring Size: 229; Clamp Size: 75. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Description:
Joint size: 24/40. A.002in. thick fluoropolymer resin sleeve for standard taper joints provides a grease-free seal. Sold in packages of 3 each.
NS Joint Sleeves and Connectors
Print…
List View
Easy View
