Supplier >
Chemglass
Print…
You Searched For:
3,825 results were found
Chemglass
Supplier:
Chemglass
Description:
Squibb-style separatory funnel with the plain lower stem replaced by an inner standard taper joint of the listed size having a sealed in drip tip.
Catalog Number:
(76333-454)
Supplier:
Chemglass
Description:
Used to install a ¹/₄” OØ (6.35 mm) level sensor into an M10 headplate port.
Supplier:
Chemglass
Description:
Adapter permits vessels to be purged with an inert gas during sampling or transfer with a cannulas.
Supplier:
Chemglass
Description:
Cylindrical drying ampules with 10 mm O.D. top stem.
Supplier:
Chemglass
Description:
Cylindrical shaped tubes are useful for storage or simple reactions, with a standard taper outer joint at the top and a Chem-Vac™ Chem-Cap® valve side...
Supplier:
Chemglass
Description:
Apparatus designed for use in distillation of material such as THF or ether.
Supplier:
Chemglass
Description:
Condenser for use in refluxing from 1 to 20 ml of solvent in flasks having a capacity of 5 to 50 ml.
Supplier:
Chemglass
Description:
Graduated distilling receivers with a standard taper outer joint on top.
Supplier:
Chemglass
Description:
Bubbler has an adjustable inner tube with a #9 Chem-Thread.
Supplier:
Chemglass
Description:
The new and improved CG-1167 HPLC Cap system provides the safest and most economical way of storing high performance, low pressure liquid chromatograp...
Catalog Number:
(80067-966)
Supplier:
Chemglass
Description:
Abderhalden feature a 57 mm flat O-ring connection.
Catalog Number:
(80064-116)
Supplier:
Chemglass
Description:
Condenser uses the surrounding air to dissipate the heat of the reaction during refluxing.
Supplier:
Chemglass
Description:
Condenser has a large opening at the top for use with dry ice/acetone or liquid nitrogen.
Supplier:
Chemglass
Description:
Unions are made from 316 stainless steel.
Supplier:
Chemglass
Description:
250ml. Joint size: Lower Ball: 35/20. Reservoir for use with CG-1199 and CG-1200 columns. Reservoir has a top 35/20 socket joint for use with CG-1201 flow control adapter and the listed size lower ball joint.
Supplier:
Chemglass
Description:
This moisture test receiver is used to determine the water content in petroleum and bituminous material.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
 is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||
List View
