Supplier >
Labconco
Print…
You Searched For:
562 results were found
Labconco
Catalog Number:
(10002-752)
Supplier:
Labconco
Description:
The AtmoSense™ Oxygen Monitor is designed for general purpose trace oxygen detection as low as 1ppm
Supplier:
Labconco
Description:
Intelli-Sense™ Multi-Speed Coated Steel Blowers are recommended for low to moderately corrosive applications
Supplier:
Labconco
Description:
SpillStopper Work Surfaces are molded from a special formulation of corrosion-resistant epoxy resins
Supplier:
Labconco
Description:
Recommended whenever perchloric acid is used in combination with other corrosive inorganic reagents.
Supplier:
Labconco
Description:
Wire and perforated shelf kits for evidence to sit on or hang from for fuming in the CApture™ BT Fuming Chamber.
Supplier:
Labconco
Description:
The patented RXPert Double Filtered Balance System is a Class I Enclosure that meets the USP <800> requirements for non-sterile compounding wi...
Supplier:
Labconco
Description:
Kit provides a second level of HEPA Filtration to meet United States Pharmacopeia (USP) <800> standard for redundant HEPA Filter in series.
Supplier:
Labconco
Description:
The patented RXPert Single Filtered Balance System is a Class I Enclosure that meets the USP<800> requirements for non-sterile compounding
Supplier:
Labconco
Description:
For use with Protector* Controlled Atmosphere Glove Boxes.
Supplier:
Labconco
Description:
Heated shelf with sensor, for use with bulk tray dryer.
Supplier:
Labconco
Description:
For Labconco Basic* Hoods. Kit includes one remotely controlled service fixture with 6.35mm OD brass valve and copper tubing, fixture knob, Kynar* hose connector. Color coded.
Supplier:
Labconco
Description:
Laboratory hoods feature sashes on two sides that, when mounted in an island or peninsular configuration, provide unobstructed viewing from either sid...
Supplier:
Labconco
Description:
SpillStopper* Work Surface, 4ft w x 30in d, with cupsink cutouts, left side and right rear, molded of corrosion-resistant solid epoxy. Dished & contoured to conform to interior liner of Protector Pass-Through Hoods. Pre-drilled 2.5in (6.4cm) dia plumbing holes.
Supplier:
Labconco
Description:
Systems combine vortex motion, heat, and vacuum to quickly evaporate solvents from multiple biological or analytical samples
Supplier:
Labconco
Description:
Evaporation systems use nitrogen blow down, vortex motion, and heat to speed up evaporation of up to 48 small samples or eight 450mL samples at once
Supplier:
Labconco
Description:
FreeZone® Freeze Dry Systems were designed to provide simplicity of use and convenience when freeze drying samples for the laboratory.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
 is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||
List View
