Moulds
Supplier:
Leica Biosystems
Description:
These re-usable base molds are made from stainless steel and the internal rounded corners allow for easy removal of the formed wax block.
Supplier:
Electron Microscopy Sciences
Description:
The SupaMega range of stainless steel base molds have extra deep side walls allowing wax to be decanted into the cassettes during embedding without th...
Supplier:
Electron Microscopy Sciences
Description:
Natural, hard gelatin capsules are used as an embedding mold for water miscible resins, or resins which need to be cured by transmitted light. The gel...
Supplier:
Electron Microscopy Sciences
Description:
Disposable flexible LDPE mold for embedding.
Supplier:
SPANISH FORK FOUNDRY
Description:
A full line of cast iron gold and silver mold products are available.
Supplier:
Electron Microscopy Sciences
Description:
Red molds made out of flexible silicone rubber with closed bottom.
Catalog Number:
(100491-606)
Supplier:
Electron Microscopy Sciences
Description:
This mold is designed primarily for embedding cell culture specimens grown either directly on the bottom of a dish or on the filter when cross section...
Supplier:
Sakura Finetek
Description:
Disposable plastic Cryomold® molds create a uniformly shaped, flat-surface specimen block when used with O.C.T
Supplier:
Electron Microscopy Sciences
Description:
Our molds are made from the strongest possible silicone rubber providing extremely high tear resistance. They are all reusable and produce embedding b...
Supplier:
Simport Scientific
Description:
The M474 Stainless Steel Base Molds fit most cassettes and offer superior thermal exchange.
Catalog Number:
(102094-024)
Supplier:
Electron Microscopy Sciences
Description:
Strip disposable molds are manufactured from high impact polystyrene, offering a low cost alternative to stainless steel
Supplier:
Electron Microscopy Sciences
Description:
The cavity measures L x W x D: 12 x 5 x 3 mm
Supplier:
General Data Healthcare
Description:
Reusable Base Mold with winged edges come in stainless steel and plastic
Supplier:
Electron Microscopy Sciences
Description:
These PTFE molds allow for easy removal of 10 plastic blocks when using the Histobloc® system.
Supplier:
Electron Microscopy Sciences
Description:
For curing anaerobic material, we recommend using Aclar® film, cut-to-size of the mold and lower on top of the mold after you ʽjust over-fill’ the cav...
Supplier:
Electron Microscopy Sciences
Description:
Introducing the EM5 - an innovative new design based on the widely used 8 mm Ø size embedding mold.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||