Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
The Equipment & Instrument Service Team’s focus is to provide comprehensive service solutions for our customers. We provide validation, calibration, preventative maintenance, and extended warranties on all equipment & instruments in and around the laboratory.
Description:
Thread Size: 38-430; Liner Type: Rubber. Cap for use with CG-190 G.P.I. screw thread tube. Part numbers CG-191-01 through CG-191-12 are made of black plastic with a choice of white rubber or fluoropolymer resin liner.
Description:
Bottle I.D.xLength: 35x300mm. GL Cap Size: 45. Heavy wall bottle used in hybridization incubators or ovens with rotators. An alternative to plastic bags or boxes, the membrane is rolled and placed into the bottle which is secured in a rotisserie.
Description:
Replacement Components. #9 Compression Cap. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters. Will accept glass, metal or heavy wall plastic tubes having diameters between 7 to 18mm O.D.
Description:
Sampling Tube, Adjustable, for Bio Reactors, Fits Reactor: 15L, Maximum Immersion Length: 290mm, Thread Size: M10, adjustable to permit the culture fluid to be sampled at any desired level, 1/4inch OD
Description:
Replacement Components. Body for CG-4515-21, 71/60. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.
Description:
Replacement Components. Stopper for CG-4514-04, 34/45. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.
Description:
For large volume solvent vapor removal during rotary evaporation. Place between vacuum source and rotary evaporator to prevent solvent vapors from entering pump. Plastic-coated to contain solvent in case of breakage. Complete with UHMW lid with handle.
Description:
Replacement Components. Stopper for CG-4515-03, 40/50. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.
Description:
Two-piece construction. Inlet and outlet are 180[degree] apart for installation. Stopper has standard taper inner joint; body has outer joint. Hose connections OD: 13mm (smallest serration); 16mm (largest serration). Body ODxLength: 38x225mm. Joint size: 34/45.
Description:
100ml. Joint size: Top Outer Joint: 24/40; Lower Inner Joint: 14/20. Trap is designed to eliminate hold up common to the round style of rotary evaporator traps.
Description:
250ml. Joint size: Lower Inner Joint: 24/40. Similar to CG-1320, but with the addition of two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.
Description:
Complete Trap. Body O.D.xLength: 38X225mm; O.D. of Side and Inner Tubes: 13mm. Joint size: 34/45. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.
Description:
Replacement Components. UHMW Lid. Trap is designed for large volume solvent vapor removal during rotary evaporation. Trap is placed between the vacuum source and the rotary evaporator to prevent solvent vapors from entering the vacuum pump.
Description:
Size: 65. Made entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.
Description:
500ml. Overall HeightxWidth: 475x160mm. Trap is designed for high volume solvent removal by vacuum. The unique design of the stopper decreases the chance of freezing by allowing vapor to pass through the holes in the side of the inner tube.
Description:
Replacement Components. Stopper for CG-4515-01, 29/42. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.
Description:
100ml. Joint size: Lower Inner Joint: 14/20. Trap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser.
Description:
100ul. Needle Connection Type: Removable; Supplied Needle Gauge: 22s. Basic micro syringe used for the precise liquid delivery in volumes of 5 to 100ul. The accuracy of these syringes is +/-1% of the total volume with the repeatability of dispensed volume being +/-1%.
Description:
1.5-1.8mm O.D.x0.20 wall tubes, Vial of 100. Similar to CG-1840, but closed at one end. Tube is manufactured from borosilicate glass and packaged 100 tubes per vial. The Code -02 has a smaller I.D. to conform to U.S.P. XXI requirements.
Description:
50.0ml. Needle Connection Type: fluoropolymer resin Luer Lock. Syringes are designed for use in both liquid and gas chromatography. Due to the all fluoropolymer resin tip, they can also handle highly corrosive or Ultra-pure liquids.
Description:
NMR Tube Washer Only. NMR Tube O.D; 10mm; Length of NMR tube: 7in. The Morris NMR tube cleaner is an inexpensive, durable apparatus which will clean 5 or 10mm NMR tubes with as little as 10ml of solvent in one easy operation.