Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
The adapters come in standard joint sizes that are compatible with most equipment. Used in reaction systems to regulate the flow of gases or liquids, adapters are typically fabricated from high-quality borosilicate glass for tight connections with other glassware. Offered in a variety of different joints and flange shapes, the right adapter for specific systems is easy to find. Adapters may include tube connectors to use in pressure or vacuum apparatus.
Description:
H: 85mm. Joint size: 29/42. Adapter has a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 4 and 7mm.
Description:
500ml. Joint size: Lower Inner: 24/40. Reservoir for use with CG-1192 and CG-1193 columns. Reservoir has a top 24/40 standard taper outer joint for use with CG-1195 flow controller, and the listed size lower inner joint.
Description:
H: 55mm. Joint size: 19/22. Adapter has a tubulation at the top for use with a CG-1040 rubber fitting. Fitting permits insertion of plain stem thermometers or bleed tubes. Supplied complete with one CG-1040 rubber fitting.
Description:
Top Outer Joint: 45/50; Lower Inner Joint: 24/40. Used to connect dissimilar standard taper joint sizes. Lower inner joint is smaller in size than the top outer joint.
Description:
HxW: 130x30mm. Joint size: 24/40. Used to regulate the flow of gases or liquids into reaction systems. fluoropolymer resin stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration.
Description:
Top Outer Joint: 29/42; Lower Inner Joint: 45/50. Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.
Description:
H: 85mm. Joint size: 29/42. With a serrated hose connection for vacuum or for the introduction of gases. The #7 Chem-Thread at the top is for a vacuum tight seal of plain stem thermometers or any other tube having an O.D. of betwen 4 and 7mm.
Description:
Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm and is supplied complete with a CG-423 retaining clip. Hose connection has an O.D. of 8mm at the middle serration. 14/20 Inner Joint
Description:
Joint size: 14/20. Length Between Joints: 30mm. Used to expand the length of apparatus. Adapter can also be used as an air condenser. With standard taper top outer and lower inner joint.
Description:
Joint size: 24/40. Fluoropolymer resin stopcock. Allows vessels to be flushed with inert gas while sampling directly thru bore of 'T'-bore stopcock. Available with 4mm glass stopcock having constant pressure retention device or 4mm bore 1-5 taper fluoropolymer resin plug.
Description:
COMPLETE ADAPTERS. Joint size: 24/40. Unique adapter is made entirely of fluoropolymer resin and is supplied complete with a series of 5 all fluoropolymer resin ferrule style cones. These cones have inside diameters that run from 3.5 to 6.
Description:
Top Outer Joint: 24/40; Lower Inner Joint: 19/22. Used to connect dissimilar standard taper joint sizes. Lower inner joint is smaller in size than the top outer joint.
Description:
HxW: 130x50mm. Joint size: 29/42. Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration.
Description:
Lower Inner Joint: 34/45; Top Outer Joint: 24/40. Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.
Description:
Joint size: 14/20 Inner. Gas inlet adapter with a 2mm glass stopcock having a constant pressure retention device. Available with a choice of inner or outer standard taper joint. Top arm is 9mm O.D. medium wall tubing for with CG-3022 septum.