RESTEK CORP
Catalog Number:
(10855-462)
Supplier:
Restek
Description:
For use with super-clean gas filter for LC-MS.
Catalog Number:
(10853-722)
Supplier:
Restek
Description:
Suction Filter, for HPLC Systems, Material: Stainless Steel, Model Number: LC-10ADvp, 10ATvp, 20AD/AB, 2010A/C HT
Catalog Number:
(RK25008)
Supplier:
Restek
Description:
A 316 stainless steel tip with a Tefzel® collar seals to a corrosion-resistant 316 stainless steel filter element.
Supplier:
Restek
Description:
'Quick connect' fittings with spring-loaded check valves allow filter replacement in seconds without tools or contamination.
Catalog Number:
(RK25000)
Supplier:
Restek
Description:
This high-pressure cup-type filter can be used in fluid streams operating to 15,000 psi (103,421 kPa).
Supplier:
Restek
Description:
For use in critical orifice fitting.
Catalog Number:
(10803-366)
Supplier:
Restek
Description:
In-line filters with easy install design.
Catalog Number:
(10855-640)
Supplier:
Restek
Description:
Valve cuts off gas supply in the event of a flashback.
Supplier:
Restek
Description:
Packed with an extremely high surface area, baked coconut shell-based activated carbon.
Catalog Number:
(10118-326)
Supplier:
Restek
Description:
Recommended for samples containing less than 10% solid particulates, these standard filter vials are constructed using PTFE or PES for long-lasting du...
Catalog Number:
(10855-012)
Supplier:
Restek
Description:
Install an indicator after the Click-On in-line gas filter so there is no confusion about when to replace the traps.
Catalog Number:
(10855-386)
Supplier:
Restek
Description:
Super-clean filters are specifically designed for purification of helium in GC-MS systems.
Supplier:
Restek
Description:
Super-clean click-on traps measure to be 21.6×3.2 cm (8.5×1.25").
Supplier:
Restek
Description:
Indicating moisture traps reduce water to less than 10 ppb; indicator changes from yellowish-green to blue at 5% relative humidity.
Catalog Number:
(10059-484)
Supplier:
Restek
Description:
These SPE Flow Filters are designed to be used with Resprep® Diskcover-47 reservoir, or any 47 mm glass sample reservoir.
Catalog Number:
(10803-264)
Supplier:
Restek
Description:
All traps measure 27×4.4 cm.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||