ORS NASCO, INC.
Supplier:
Safety & Industrial Supplies
Description:
Brushes are designed to remove large burrs and heavy contamination, including rust, paint, oxides, and scale.
Supplier:
Safety & Industrial Supplies
Description:
For use with oil base paint, latex paint, water base paint, varnish, and shellac.
Supplier:
Safety & Industrial Supplies
Description:
Tube brushes with nylon bristles and metal handle with loop end.
Supplier:
Safety & Industrial Supplies
Description:
Designed for general cleaning on small parts, seams, and soldered joints.
Supplier:
Safety & Industrial Supplies
Description:
Used for applying sealants to roofs
Supplier:
Safety & Industrial Supplies
Description:
Tampico fill has excellent liquid retention and is highly resistant to heat, solvents, and chemicals.
Catalog Number:
(300046-526)
Supplier:
Safety & Industrial Supplies
Description:
Cleans the outside and inside diameters of tubes and fittings.
Catalog Number:
(300047-230)
Supplier:
Safety & Industrial Supplies
Description:
Refill brush for most chipping hammers.
Supplier:
Safety & Industrial Supplies
Description:
Specifically designed for increased durability when cleaning right angles, corners and fillet welds.
Supplier:
Safety & Industrial Supplies
Description:
Elastomer gradually wears, exposing consistent short trim for maximum aggression and long life.
Supplier:
Safety & Industrial Supplies
Description:
Designed for use on large, flat surfaces, brushes provide fast, efficient brushing action.
Catalog Number:
(300086-500)
Supplier:
Safety & Industrial Supplies
Description:
Ideal for heavy-duty scrubbing.
Catalog Number:
(300081-312)
Supplier:
Safety & Industrial Supplies
Description:
Brush with carbon steel bristles and hardwood handle.
Supplier:
Safety & Industrial Supplies
Description:
Durable brushes are designed for light cleaning on relatively large areas. Use with flexible shaft tools and die grinders.
Catalog Number:
(300048-156)
Supplier:
Safety & Industrial Supplies
Description:
Small stiff steel wire brush with loop handle.
Catalog Number:
(300086-454)
Supplier:
Safety & Industrial Supplies
Description:
Two tapered handle holes allow user to choose the correct brush angle needed.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us at 1-800-932-5000.
To process your orders without delay, please provide the required business documentation to purchase this product.
To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email CMD_NA@vwr.com or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:
* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at 1-800-932-5000.
|
|||||||||