Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
The Equipment & Instrument Service Team’s focus is to provide comprehensive service solutions for our customers. We provide validation, calibration, preventative maintenance, and extended warranties on all equipment & instruments in and around the laboratory.
Description:
Solvent inlet filter with stem, Material: Stainless steel, Porosity: 10 um, For tube with outer Diameter 1/16in, used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.
Description:
Inlet filter, Last Drop, Material: PTFE, Pore size: 2.5UM, utilises a flat element, which sits parallel to bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system, for biochromatography applications
Description:
Inlet solvent filter, Bottom-of-the-Bottle, made from 100% PEEK, Biocompatible, Two built-in PEEK frits, Porosity: 10um, For tube Outer Diameter 3.17 mm, bottom frit (2 or 10 um) will draw solvents from within 2 mm of the bottom of the solvent bottle
Description:
Solvent inlet filter with stem, Material: Stainless steel, Porosity: 10 um, For tube with outer Diameter 1/8in, used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.
Description:
Inlet filter, Last Drop, Material: PTFE, Pore size: 10UM, utilises a flat element, which sits parallel to bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system, for biochromatography applications
Description:
Inlet solvent filter, Bottom-of-the-Bottle, made from 100% PEEK, Biocompatible, Two built-in PEEK frits, Porosity: 2um, For tube Outer Diameter 3.17 mm, bottom frit (2 or 10 um) will draw solvents from within 2 mm of the bottom of the solvent bottle
Description:
Attaches directly to 3.8L solvent bottle. Filters particulates that could damage pumps and detectors. Removes dissolved oxygen in the solvent that can cause detector drift and instability. Filters and degasses 3.8L of solvent in ten minutes.
Description:
Arium* mini plus Pre-treatment Cartridge, Reliable protection for the pre-treatment of feed water, Efficient purification via a combination of activated carbon, a catalyst and a downstream reverse osmosis membrane, reduce up to 98% of all salts
Description:
Arium* mini Scientific Pack Deionization cartridge, optimized for the removal of both organic and inorganic constituents. The set was designed specifically to match the unit and delivers ultrapure water that exceeds the ASTM Type 1 quality standard.
Description:
Inlet Filter, BOTB, for 1/16" I.D. This kit contains all of the tube fittings, adapters and solvent inlet filters required to plumb any ULTRA-WARE cap to virtually all HPLC pumps.
Description:
Inlet Filter, BOTB, for 1/8" O.D. Tubing This kit contains all of the tube fittings, adapters and solvent inlet filters required to plumb any ULTRA-WARE cap to virtually all HPLC pumps. Not recommended for use with THF or chlorinated hydrocarbons.
Description:
Inlet Filter, for 1/8" O.D. Tubing This kit contains all of the tube fittings, adapters and solvent inlet filters required to plumb any ULTRA-WARE cap to virtually all HPLC pumps. Not recommended for use with THF or chlorinated hydrocarbons.
Description:
Inlet Filter Assembly Kit, Contents: 1x Support net, 1x Filter (mounted on a fliterholder), 1x Screw lid and cap membrane, For Use With classic AKTA, Polypropylene (PP), Titanium Alloy (Ti alloy)
Description:
O.D. x Length; 1/2" x 1". Stem O.D; 1/8". Fits Tubing O.D; 3/16 Ten micron porosity all stainless steel filter with a stem for slip connection to PTFE tubing. Recommended for use with THF-resistant systems.
Description:
O.D. x Length; 7/8" x 1 1/2 Ten micron porosity filter with an ETFE nut and ferrule for connection to 1/8" O.D. PTFE tubing. A CTFE hose barb adapter for connection to 1/4" O.D. (5/32" I.D.) tubing is also included.
Description:
Inlet Filter, for 1/16" I.D. This kit contains all of the tube fittings, adapters and solvent inlet filters required to plumb any ULTRA-WARE cap to virtually all HPLC pumps.
Print…
List View
Easy View
