Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
The Equipment & Instrument Service Team’s focus is to provide comprehensive service solutions for our customers. We provide validation, calibration, preventative maintenance, and extended warranties on all equipment & instruments in and around the laboratory.
Description:
500ml. Flange I.D; 100mm; Body O.D.xH: 105x270mm. Drain Valve Size: 6. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.
Description:
100mm Schott* Flange, CN 24/40, 3-SN 24/40 Vertical, 1-SN 24/40 Angled 10 deg. Four side necks are vertical and one neck has a 10 deg degree angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring
Description:
Joint size: 14/20. Hose Connection Size: 7.0mm; Style: A. Adapters for use with manifolds such as AF-0450 through AF-0454 to permit port connection to standard rubber hose. Adapters have hooks just below the grind for use with CG-110 stainless steel springs.
Description:
Bulb: 15ml. Bulb Diameter: 35mm; Bulb Height: 90mm. Kugelrohr bulbs having 14/20 standard taper joints on both ends to connect to other bulbs or single neck round bottom flasks. CG-1012-14 adapter permits connection Kugelrohr assembly to vacuum.
Description:
2000ml. Joint size: Center Neck: 29/42 ; Side Necks: 24/40. Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and 20[degree] angled side necks.
Description:
Tubing O.D.xWall: 75x2.4mm. Joint size: 71/60. Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.
Description:
25. Disc O.D; 25; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.
Description:
HxW: 105x60mm. Joint size: 14/20. With standard taper outer joint at the top, and inner joints on the bottom and sidearm, all being the same size. Inner joints are at a 75[degree] angle to one another.
Description:
Zero Dead Space Drain Valve, 2in Beaded Pipe, Standard, 1in Beaded Pipe Sidearm, GL-40 Thread, Auto-Stop When Opening the Valve, Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening a
Description:
60ml. Joint size: 19/22. Porosity: C. Buchner style filter funnel having a lower standard taper inner joint and serrated tubulation for connection to a vacuum source. Disc diameters and height above the disc are the same as CG-1402.
Description:
HxW: 115x50mm. Joint size: 29/26. Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration.
Description:
Joint size: 24/40. Stopcock Type: fluoropolymer resin. Adapter has a 'T'-bore stopcock permitting vessels having a standard taper outer joint to be purged and evacuated.
Description:
30ml. Joint size: 24/40. Porosity: M. Buchner style filter funnel having a lower standard taper inner joint and serrated tubulation for connection to a vacuum source. Disc diameters and height above the disc are the same as CG-1402.
Description:
10ml. HxW: 225x80mm. Joint size: 14/20. Dean-Stark receiver used for determining the water content of various materials. Can be used with ASTM Method D-95 along with similar ASTM methods. The 10ml size has subdivisions of 0.1 from 0 to 2ml, and 0.
Description:
Bag, Cell Culture, Motion, 10L, Ultra Clear, 6 Port, manufactured from ultra clear Flex 600 robust film and gamma irradiated, meets USP Class VI, Compatible with GE wave Rocking platforms, or mammalian and plant cult
Description:
Replacement Components. Receiver Tube, 14/20, 12ml. The 135[degree] angle between the center line of the condenser and the receiver tubes allow the distillate to fall directly into the receiver tubes. This receiver can be used with short path style distilling heads.
Description:
Tubing O.D.xWall: 57x2.4mm; OAL Length: 16in. Joint size: 45/50. Type: Outer. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.
Description:
Permits rotary evaporation of contents of pressure vessel after reaction is complete. Can be connected to vacuum line having a 24/40 port. Eliminates need to transfer samples to conventional round bottom flask. Includes 1 open top bushing and Viton o-ring
Description:
REPLACEMENT FLUOROPOLYMER RESIN CONES. Set of one each of above listed cones. Made entirely of fluoropolymer resin. Supplied complete with series of 5 all fluoropolymer resin ferrule style cones with inside diameters that run from 3.5 to 6.
Description:
Overall Height: 220mm. Joint size: 24/40. Flange I.D; 31mm; Pluro Stopper: #3. Adapter used for reduced pressure filtration with plain stem buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D.
Description:
1000ml. Joint size: 24/40. Stopcock Type: Glass. Round bottom single neck flask having a standard taper outer joint. Available with a 2mm glass stopcock having a constant pressure retaining device or an all fluoropolymer resin AIRFREE valve.
Description:
Flange I.D; 60mm; Flange O.D; 100mm; Overall Height: 42mm. Dome style lid for construction of single or multiple neck reaction kettle heads. Mating surface is ground.
Description:
Dura-Mag* Stirrer, Magnetic, Five Position, Compact, Dura-Mag, 230V, digital, front-end, magnetic stirrers are designed for both cell culture in spinner flasks as well as general laboratory procedures requiring th
Description:
Tubing O.D.xWall: 10x1.5mm. Joint size: 7/25. Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.
Description:
Adapter used for reduced pressure filtration with plain stem buchner funels. Top has a Heavy Duty tooled flare to accept the listed pluro stopper. 24/25.
Description:
Joint size: 45/50. Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs. Adapter has a 0-4mm Chem-Cap metering plug.
Description:
10ml. HxW: 250x90mm. Joint size: 24/40. Dean-Stark receiver used for determining the water content of various materials. Can be used with ASTM Method D-95 along with similar ASTM methods. The 10ml size has subdivisions of 0.1 from 0 to 2ml, and 0.
Description:
60ml. Joint size: 14/20. Frit O.D; 30; Porosity: Coarse; Sidearm Stopcock Type: Valve. Fritted filter funnel with a choice of coarse or medium porosity fritted disc. Lower outlet is a standard taper inner joint and has a CG-561-01, 0-4mm Chem-Cap fluoropolymer resin plug.
Description:
Style 'D'. From #15 O-ring Joint to: 24/40 Outer Joint. Adapters for use with AF-0060 and AF-0061 manifolds that permit the manifold to be utilized with a multitude of standard glassware or tubing products.
Description:
Tubing O.D.xWall: 28x2.0mm; OAL Length: 16in. Joint size: 24/40. Type: Inner. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.
Description:
Lower Inner Joint: 34/45; Top Outer Joint: 29/42. Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.
Description:
HxW: 110x90mm. Joint size: 19/22. With standard taper top outer and lower inner joints with sealed in drip tip. Adapter is bent at a 105[degree] angle for use in vacuum distillation. Serrated hose connection has an O.D.
Description:
Joint size: 24/40. Stopcock Type: Glass. Adapter permits vessels to be purged with an inert gas during sampling or transfer with a AF-0519 cannula. Available with a 4mm glass or fluoropolymer resin stopcock having 9mm O.D.
Description:
Zero Dead Space Drain Valve, 2in Beaded Pipe, Stabilizing pin, 1in Beaded Pipe Sidearm, Torque Knob, GL-40 Thread, Glass Body Features a Heavy Duty GL Style Glass Thread, Auto-Stop When Opening the Valve, Zero Dead
Description:
12. Disc O.D; 12; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.
Description:
CUT DRIP JOINTS. Joint size: 34/45. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.
Description:
20. Disc O.D; 20; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.
Description:
Kjeldahl shape for heating and stirring and permitting easy transfer of liquids or solids. Lower portion of flask fits standard heating mantles. Volume: 500mL. Joint size: 24/40. With 2mm glass stopcock, constant pressure retaining device, fluoropolymer resin AIRFREE valve.
Description:
Joint size: 14/20. Frit O.D; 30mm; Porosity: Medium; Stopcock Type: Glass. Similar to AF-0544, but with the addition of two 2mm glass stopcocks with constant pressure retension devices or all fluoropolymer resin AIRFREE valves at either end of the tube.
Description:
HxW: 100x60mm. Joint size: 19/22. Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration.
Description:
Capacity: 15mL. Joint size: 24/40. Porosity: Medium. With a lower standard taper inner joint and serrated tubulation for connection to a vacuum source.