Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
The Equipment & Instrument Service Team’s focus is to provide comprehensive service solutions for our customers. We provide validation, calibration, preventative maintenance, and extended warranties on all equipment & instruments in and around the laboratory.
Description:
200+/-0.10ml. Stopper Size: 13. Flasks are manufactured to conform to Federal Specifications NNN-F-289 for Type 1, Class 'A' unserialized flasks and ASTM E-288. Supplied complete with one closed bottom polyethylene stopper.
Description:
5ml. Class 'A' micro volumetric flask calibrated to contain. Flask has a GPI 13-245 top thread and is supplied complete with an open top screw cap and fluoropolymer resin faced silicone septa.
Description:
LxDia; 1-1/2x5/8in. Fits Flask Capacity: 300-500ml. Egg shaped magnetic stirring bar provides its own pivot point without separate ring or abrupt change in contour.
Description:
1000ml. Joint size: 35/20. Round bottom, HEAVY WALL single short neck flask with a spherical socket joint. Flasks having a 35/20 socket joints are used as replacements for the collection flask on rotary evaporators.
Description:
Adapter with a choice of full or medium length joints & when placed between the distilling flask & columm prevents splash-ups. Overall height is minimal to aid in effective distillation
Description:
Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton* has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.
Description:
Vial, Clear with White Grad Spot, WISP, GPI 13-425, designed to work in Shimadzu and Waters WISP* 48 position auto samplers, Dimensions: 15x45mm, Size: 4.0mL
Description:
Vial Only, Clear, Material: Glass, Shell, most economical alternative for use in an auto sampler, Feature thicker walls for safer sample handling, Dimensions: 15x45mm, Size: 4.0mL
Description:
TLC Tank Rack. fluoropolymer resin coated aluminum rack to fit either CG-1183 or CG-1184 TLC developing tank. Rack will hold six 20cmx20cmx1/8in. or twelve 20cmx20cmx1/16in. plates.
Description:
Fits Standard Taper Joint Size(s): 29/26-29/42; Fits Tubing I.D; 25.5. Suba-Seal septum are flanged stoppers with a hollow plug and sleeve extension that folds down over the neck of the vessel.
Description:
LxDia; 50.8x9.52mm (2x3/8in.). Octagon cross-section having a moulded-in pivot ring. The PTFE coated Alnico magnet permits magnetic agitation without contamination.
Description:
Replacement Components. Saddle O-ring Only. Grease-Free fluoropolymer resin stirrer bearing designed for use in moderate vacuum applications.
Description:
100ml. Joint size: 29/26. Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Flasks with joint sizes other than those listed are available.
Description:
Column Length: 200mm; Overall Length: 305mm. Joint size: 24/40. Jacketed distilling column has indentations on the inner tube to support packing material. The jacket allows the column to be used as a condenser.
Description:
Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton* has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.
Description:
Complete Chamber. Lower Vessel I.D.XHeight: 50x100mm. Joint size: O-Ring: 50. Clamp Size: #75; O-Ring Size: #229. Chamber for use in drying small quantities of materials in dram vials.
Description:
COMPLETE Digital Hotplate Kit, AREX-6 with probe, with Vertical Support Rod, Boss Head, and Support/Holding Rod, 115V, for Magnetic Hotplate Stirrer
Description:
500ml. G.P.I Thread Size: 38-430. Erlenmeyer flask with screw thred finish. Supplied complete with white rubber lined black phenolic cap. Long skirted caps can be loosened without falling off while shaking flask.
Description:
Adapter has an outer luer joint that provides a convenient way to connect solid phase extraction (SPE) catriges, tubes or syringes to a standard taper inner joint. 14/20 Inner.
Description:
Joint size: 24/40. Stopcock bore: 2mm. Effective len: 18in. (457mm). Column ID: 2.0in. (50mm). Similar to CG-1188 but with a sealed in COARSE porostiy fritted disc to support column packing.
Description:
2000ml. Joint size: Center Neck: 45/50; Side Neck: 24/40. Round bottom. HEAVY WALL three neck flask with standard taper outer joints on the center and side necks. Indentations increase agitation of the contents of the flask during stirring.
Description:
Porosity: X-Coarse. Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D.x20mm long. Overall length is approximately 10in.
Description:
Complete Tube Washer. NMR Tube O.D; 5mm; Length of NMR tube: 7in. Design permits the cleaning of four NMR tubes at the same time. With solvent in the reservoir, rapid suction wets the inside of the NMR tube dislodging the contamination.
Description:
Top diameter: 75mm. Joint size: 24/40. Useful for the introduction of solids or liquids into reactions under atmospheric conditions. One side is flattened for use in multi-neck flasks where space is limited. With 60[degree] side angle and standard taper inner joint.
Description:
30ml. Stopcock Size: 2; Stopper Size: 13. Squibb style separatory funnel with a fluoropolymer resin stopcock. Supplied complete with a flask length stopper of the listed size. For replacement stoppers see CG-3018.
Description:
Replacement Components. Lower Vessel Only, #50 O-Ring Joint. Chamber for use in drying small quantities of materials in dram vials. Can also be used in the transfer of materials from glovebox to glovebox or to the vacuum line.
Description:
Jacket Length: 200mm; Overall Height: 485mm. Joint size: 24/40. Narrow annular space between jacket and inner tube of the West condenser provides for excellent cooling efficiency due to the increased flow rate of water.
Description:
Combination spatula, spoon and scoop, Made entirely of Stainless Steel, this spatula has both a spoon and scoop. The spoon has a diameter of 26mm while the overall length of the spatula is 195mm.
Description:
Fits Joint Size: 50/30. Clamp is used in the assembly of CG-1198 through CG-1201 chromatography column components having spherical joints. Made entirely of stainless steel with locking screw.
Description:
O.D; 2mm. Approx. Pcs. Per lb: 46,000. Solid borosilicate spheres can be used as distillation column packing, boiling stones or to provide support for chromatography columns used in gel filtrations. Beads have excellent chemical resistance.
Description:
500ml. Overall H: 435mm. Joint size: 24/40. Stopcock bore: 4mm. Cylindrical shape addition funnel similar to CG-1706, but with fluoropolymer resin stopcocks. For replacement stoppers see CG-3000.
Description:
Capacity: 600mL. Joint size: 24/40. Porosity: Coarse. With a lower standard taper inner joint and serrated tubulation for connection to a vacuum source.
Description:
5000ml. Joint size: 45/50. Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Flasks with joint sizes other than those listed are available.
Description:
Joint size: 24/40. Stopcock bore: 2mm. Effective len: 10in. (254mm). Column ID: 1.0in. (25mm). Similar to CG-1188 but with a sealed in COARSE porostiy fritted disc to support column packing.
Description:
250ml. I.D;.50in.; Effective length: 12in. Joint size: 24/40. Stopcock bore: 2mm. Similar to CG-1196 but with a COARSE porosity sealed in fritted disc to support column packing.
Description:
Vial Only, Clear, Material: Glass, Shell, most economical alternative for use in an auto sampler, Feature thicker walls for safer sample handling, Dimensions: 12x32mm, Size: 2.0mL
Description:
Fits Joint Sizes: 12/18, 12/30. Color: Violet. Made of Derlin, the clamp is non-corrosive and will not scratch glass. Can be used to 140[degree]C. Color coded for easy identification. SOLD IN A PACKAGE OF 10.
Description:
2000ml. Joint size: 29/42. Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Flasks with joint sizes other than those listed are available.
Description:
Top diameter: 50mm. Joint size: 14/20. Useful for the introduction of solids or liquids into reactions under atmospheric conditions. One side is flattened for use in multi-neck flasks where space is limited. With 60[degree] side angle and standard taper inner joint.
Print…
List View
Easy View
