Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
The Equipment & Instrument Service Team’s focus is to provide comprehensive service solutions for our customers. We provide validation, calibration, preventative maintenance, and extended warranties on all equipment & instruments in and around the laboratory.
Description:
Inner Tube Height: 200mm; Overall Height: 325mm. Joint size: 24/40. Vapors rise to the top of inner tube then travel downward and condense in this highly efficient concentrator.
Description:
Disc. Dia; 10mm; Tube O.D; 13mm; Porosity: Medium. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.
Description:
Bottle Only. Joint size: 34/15. Fits Plate Size: 1x4in./25x100mm. Cylindrical glass chamber for development of TLC plates from 25x75mm to 50x200mm. Chamber has a short length standard taper outer joint.
Description:
1000ml. Stopcock Size: 4; Stopper Size: 27. Squibb style separatory funnel with a glass stopcock. Supplied complete with a flask length stopper of the listed size. For replacement stoppers see CG-3018.
Description:
HxW: 130x50mm. Joint size: 24/40. Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration.
Description:
Size in: 6X6in.; Thickness: 1/8in. Glass or Duran borosilicate plate glass. The 1/16in., 1/8in. and 1/4in. thick plates have edges that are cut and swiped. The 1/2in. thick and over have ground edges.
Description:
1000ml. Joint size: Center Neck: 29/42; Side Necks: 24/40. Round bottom, HEAVY WALL, three neck flask with standard taper outer joints and a #7 Chem-Thread for insertion of thermometers or bleed tubes having a O.D. between 4 and 7mm.
Description:
25ml. Joint size: 14/20. Stopcock Type: Glass. Cylindrical shaped tube useful for storage or simple reactions. Tube has a standard taper outer joint. Available with a 2mm glass stopcock having a constant pressure retention device or an all fluoropolymer resin AIRFREE valve.
Description:
100ml. Joint size: 19/22. Pear shape, HEAVY WALL flask with a standard taper outer joint. Flasks with joint sizes other than those listed are available.
Description:
Reservoir Only. 50ml. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb.
Description:
Optitherm* blocks provide a safe and cost effective solution for replacing existing oil baths and heating mantles. The PTFE shield on the unit keeps the exterior surface area at a temperature that is safe to touch. For 100 ml round bottom flask.
Description:
Capacity: 125mL. Joint size: 24/40. Cylindrical style, with double scale of numbers, one up from stopcock and one down from capacity line. With standard taper outer joint and lower inner joint, both same size, and pressure equalizing arm.
Description:
250ml. Approx. Height: 360mm. Joint size: 24/40. Cylinders are calibrated to contain at 20[degree]C. Supplied without stopper. For standard taper stoppers see CG-3000. Tolerances and subdivisions are the same as CG-1221.
Description:
3000ml. Joint size: Center Neck: 29/42; Side Necks: 24/40. Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and vertical side necks.
Description:
50ul. Needle Connection Type: Fixed; Supplied Needle Gauge: 22s. Basic micro syringe used for the precise liquid delivery in volumes of 5 to 100ul. The accuracy of these syringes is +/-1% of the total volume with the repeatability of dispensed volume being +/-1%.
Description:
Joint size: 24/40. Top Dia: 100mm; C to C of Offset: 40mm. Funnel has the lower stem made with an offset to permit use with multi-neck flasks.
Description:
45mm OD x 250mm L. O-ring joint provides a vacuum tight, grease free seal. Serrated hose connections are 13.5mm at the smallest serration and 15.5mm at the largest serration. Supplied with a stopper, lower body, viton* o-ring, and s.s. pinch clamp.
Description:
Bulb: 50ml. Bulb Diameter: 50mm; Bulb Height: 105mm. Kugelrohr bulbs having 14/20 standard taper joints on both ends to connect to other bulbs or single neck round bottom flasks. CG-1012-14 adapter permits connection Kugelrohr assembly to vacuum.
Description:
50ml. Joint size: 14/20. Round bottom, HEAVY WALL single long neck flask with a standard taper outer joint. Flasks with joint sizes other than those listed are available.
Description:
Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton* has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.
Description:
Joint size: 24/40. Stopcock bore: 2mm. Effective len: 18in. (457mm). Column ID: 2.0in. (50mm). Column has a fluoropolymer resin stopcock and a top outer joint. Glass wool (not supplied) is used to support column packing.
Description:
Plug Size: 11/25; O-Ring. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.
Description:
HxW: 175x105mm. Joint size: 29/42. With outer standard taper joints on both top arms and lower inner joint. All three joints are the same size.
Description:
Vacuum / Inert Line, Right Handed. Similar to the AF-0450 5-port line, except that the line is constructed using 0-4mm Chem-Cap valves (A> instead of the CG-468-02 greased glass stopcocks on all of the 4-ports.
Description:
Includes bottle and stopper. Joint size: 34/15. Fits plate size: 25x100mm. Cylindrical glass chamber for development of TLC plates. Chamber has a short length standard taper outer joint and a hex base for added stability. Inner stopper has tool ball style handle.
Description:
250ml. Joint size: 14/20. Stopcock Type: Glass. Round bottom single neck flask having a standard taper outer joint. Available with a 2mm glass stopcock having a constant pressure retaining device or an all fluoropolymer resin AIRFREE valve.
Description:
Clear acrylic brass metering valve. For use with Chemglass process reactors. Front of flowmeter has a blue scale indicating the L/min of air. HDPE hose connection is for use with 5/16in ID tubing. Complete with a 1/2in OD mounting arm.
Description:
Joint size: 24/40. Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs. Adapter has a 0-4mm Chem-Cap metering plug.
Description:
Accessories. 45/50 Allihn Condenser. Extractor designed for EPA priority pollutant samples where the extracting solvent is heavier than water. For samples of 1 liter plus approximately 200ml of extracting solvent.
Description:
Removable Needle. O.DxI.D of Needle:.018x.010in. Needle Gauge: 26. Needle for CG-3070 and CG-3074 syringes. All needles are made of 304 full hard stainless steel and have a 22[degree] beveled point for septum penetration along with general use.
Description:
Joint size: 24/40. Stopcock bore: 2mm. Effective len: 18in. (457mm). Column ID: 1.5in. (38mm). Similar to CG-1188 but with a sealed in COARSE porostiy fritted disc to support column packing.
Description:
Compatible with Buchi Rotary Evaporators, 24/40, 288mm OAL, Decaled inR210/215in, for Glass Assembly A, Thread is made for use with standard Combi-Clip.
Description:
Complete Trap. Body O.D.xLength: 32x200mm; O.D. of Side and Inner Tubes: 10mm. Joint size: 29/42. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.
Description:
Tapered stopper provides a tight, leakproof fit while the top ring permits the stopper to be removed easily. Stoppers are made of yellow polyethylene and are sold in packages of 100 each. Fits Joint Sizes 29/42.
Description:
Capacity: 60mL. Joint size: 14/20. Porosity: Medium. With a lower standard taper inner joint and serrated tubulation for connection to a vacuum source.
Description:
Top Diamater 41mm, base 15mm, Height 28mm. Crucible for use in temperatures up to 1000 degC. Perfect for use in muffle furnace ashing procedures. Quartz material ensures sample purity for further analysis.
Description:
Top Diamater 57mm, base 20mm, Height 45mm. Crucible for use in temperatures up to 1000 degC. Perfect for use in muffle furnace ashing procedures. Quartz material ensures sample purity for further analysis.
Print…
List View
Easy View
