Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
The Equipment & Instrument Service Team’s focus is to provide comprehensive service solutions for our customers. We provide validation, calibration, preventative maintenance, and extended warranties on all equipment & instruments in and around the laboratory.
Description:
Condenser Complete. Two piece cold trap style condenser for use with rotary evaporators. Condenser has a 45/40 lower inner drip joint, a 19/38 stopcock plug, and removable hose connections using GL-14 threads.
Description:
Jacket Length: 110mm; Overall Height: 185mm. Joint size: 14/20. Narrow annular space between jacket and inner tube of the West condenser provides for excellent cooling efficiency due to the increased flow rate of water.
Description:
Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton* has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.
Description:
Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton* has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 3 O-Rings per pack.
Description:
Replacement Components. O-Ring, fluoropolymer resin/Silicone, 150mm. Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor.
Description:
Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez"µ 4079 and Chemraz"µ. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230"a C. Use with acids and etc.
Description:
O-Ring, Perfluoro, Size No 326, stocked in White 75 durometer, effective service temperature is -7 to 230 C, for acids, inorganic bases, alcohols/ethers, aromatic hydro-carbons, esters, aldehydes/ ketones, aliphat
Description:
5ml. O.D.xH: 17x147mm. Round bottom, cylindrical wall ampuls with 10mm O.D. top stem. (NOTE: Ampuls are available with top stems to fit AF-0067 Cajon unions). Sold in packages of 12 each.
Description:
Stocked in brown 75 durometer. They are suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton* has a low compression set and high temperature resistance. Useful temperature range of -30 to 200º C
Description:
Unbreakable Dewar flask is made entirely of Stainless Steel. Temperature range -200 to +200 degC. Supplied with a loose fit stopper and has a side grip & carrying handle for easy handling.
Description:
Top Diamater 62mm, base 35mm, Height 67mm. Crucible for use in temperatures up to 1000 degC. Perfect for use in muffle furnace ashing procedures. Quartz material ensures sample purity for further analysis.
Description:
Stocked in brown 75 durometer. They are suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton* has a low compression set and high temperature resistance. Useful temperature range of -30 to 200º C
Description:
Plug Size: 15.2/30; Nut. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.
Description:
350ml. Exterior HxW: 157x86mm; Interior DepthxDia; 125x70mm. Dewar flask with weighted metal base for stability and protective plastic mesh cover providing a firm grip and a cushion in the event the flask is bumped.
Description:
Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton* has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.
Description:
Complete Chamber. Joint size: 60/15. Fits Plate Size: 2x8in./50x200mm. Cylindrical glass chamber for development of TLC plates from 25x75mm to 50x200mm. Chamber has a short length standard taper outer joint.
Description:
Inside Dimensions DepthxI.D; 350x75mm. Joint size: 24/40. Condenser has large opening at the top for use with dry ice/acetone or liquid nitrogen. Condenser has a lower inner drip tip joint and hose connections with an O.D. of 10mm at the middle serration.
Description:
Micro Graham Condenser, Compatible with Mettler Systems, 101mm OAL, GL-14 top thread, 10/18 lower inner joint, GL-14 thread inlet/outlet. Supplied complete with caps with apertures and hose connections
Description:
Bore : 4mm; Plug Size: 17.35/50; Sidearm OD: 10mm. Similar to CG-476, but with the sidearms sealed at a 90[degree] angle to each other. Precision ground, hand lapped, with corresponding numbers on barrel and plug.
Description:
Replacement Components. Top Condenser Only. Two piece grease free sublimer with a flat bottom to enable heating on a hot plate stirrer. Condenser has a large top opening for use with dry ice / acetone or liquid nitrogen.
Description:
250ml. I.D; 1.0in.; Effective Length: 12in. Joint size: 24/40. Stopcock bore: 2mm. General purpose column has fluoropolymer resin stopcock, reservoir of the listed capacity and top standard taper outer joint.
Description:
Jacket Length: 200mm; Overall Height: 330mm. Joint size: 24/40. Condenser has top standard taper outer and lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
Description:
Joint size: 50/30. Stopcock bore: 4mm. Effective len: 24in. (601mm). Column ID: 2.5in. (64mm). Similar to CG-1198 but with a COARSE porosity disc sealed into the lower end of the column for packing support.
Description:
Joint size: 45/50. Stopcock bore: 4mm. Effective len: 24in. (601mm). Column ID: 3.0in. (75mm). Column has a fluoropolymer resin stopcock and a top outer joint. Glass wool (not supplied) is used to support column packing.
Description:
Jacket Length: 300mm; Overall Height: 415mm. Joint size: 24/40. Reflux condenser with the coolant circulated through the inner coil instead of through the jacket as in the Graham style condenser. Condenser has standard taper top outer and lower inner drip tip joints.
Description:
Replacement fluoropolymer resin Plugs. Stopcock Bore: 6mm. Similar to CG-1172, but with addition of fluoropolymer resin stopcock to control of eluant. The CG-1175 camps used to connect lower assembly to column section.
Description:
Reservoir Only. 125ml. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb.
Description:
Replacement Components. #9 O-ring cap stopper. Similar to the AF-0450 5-port line, except that the line is constructed using 0-4mm Chem-Cap valves (A> instead of the CG-468-02 greased glass stopcocks on all of the 4-ports.
Description:
Number of Ports: 4; Overall Width: 390mm. Single bank manifold with 0-8mm Chem-Cap valves mounted on a 45[degree] angle to the user permitting easy operation inside of a fume hood. Ports are spaced 75mm center to center. All connection ports are 15mm I.D.
Description:
Replacement Components. #25 o-ring Joint cap stopper. Main vacuum line with 4 ports (A) having a unique configuration of 0-4mm Chem-Cap valves.
Description:
Stopcock bore: 2mm. Effective len: 12in. (305mm). Column ID: 1.0in. (25mm). General purpose gravity eluted column having a fluoropolymer resin stopcock and reinforced beaded top. Column is constructed using MEDIUM WALL TUBING.
Description:
Stopcock bore: 2mm. Effective len: 10in. (254mm). Column ID: 1.0in. (25mm). General purpose gravity eluted column having a fluoropolymer resin stopcock and reinforced beaded top. Column is constructed using MEDIUM WALL TUBING.
Description:
Dimensions: 5x5in.; Thickness: 1/4in. Commercial quality ground and polished clear fused quartz disc. Edges have a ground finish on all sizes.
Description:
Dimensions: 1x1in.; Thickness: 1/16in. Commercial quality ground and polished clear fused quartz disc. Edges have a ground finish on all sizes.
Description:
Texture: Fine; Fiber Size: 4-8 Microns. Useful as high temperature packing in distillation columns or as a bed support for high purity liquid chromatography. Available in fine or coarse porosity. SOLD IN 1/2 LB. PACKAGES.
Description:
Size in: 8X8in.; Thickness: 1/4in. Glass or Duran borosilicate plate glass. The 1/16in., 1/8in. and 1/4in. thick plates have edges that are cut and swiped. The 1/2in. thick and over have ground edges.
Description:
Size in: 6X6in.; Thickness: 1/4in. Glass or Duran borosilicate plate glass. The 1/16in., 1/8in. and 1/4in. thick plates have edges that are cut and swiped. The 1/2in. thick and over have ground edges.
Description:
Size in: 8x8in.; Thickness: 1/16in. Glass or Duran borosilicate plate glass. The 1/16in., 1/8in. and 1/4in. thick plates have edges that are cut and swiped. The 1/2in. thick and over have ground edges.
Description:
Vent Assembly, 2-Port, Straight, GL-45, Universal, 316L Electro Polished Stainless Steel, 4mm OD Hose Barbs, Complete with Gasket and Cap, it all types of spinner flasks, media bottles and vessels, Configurations c
Description:
Reservoir Only. 500ml. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb.