Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
The Equipment & Instrument Service Team’s focus is to provide comprehensive service solutions for our customers. We provide validation, calibration, preventative maintenance, and extended warranties on all equipment & instruments in and around the laboratory.
Description:
2000ml. Joint size: 24/40. Stopcock bore: 6mm. Subdivisions: 20.0ml. Cylindrical style addition funnel similar to CG-1716. Funnels with 14/20 and 19/22 joints are supplied with a stopper. For replacement stoppers see CG-3000.
Description:
500ml. Joint size: Center Neck: 24/40; Side Necks: 24/40. Round bottom, HEAVY WALL, four neck flask with standard taper outer joints on the center and vertical side necks. Flasks with joint sizes other than those listed are available.
Description:
1000ml. Joint size: Center Neck: 45/50; Side Necks: 29/42. Round bottom, HEAVY WALL, four neck flask with standard taper outer joints on the center and vertical side necks. Flasks with joint sizes other than those listed are available.
Description:
10ml. Joint size: 14/20. Round bottom, HEAVY WALL flask with standard taper outer joint. Side tubulation accepts a CG-1040 rubber fitment for insertion of thermometers or bleed tubes. Supplied complete with one CG-1040 rubber fitment.
Description:
10ml. Joint size: 14/20. Stopcock bore: 2mm. Subdivisions: 0.2ml. Cylindrical style addition funnel similar to CG-1716. Funnels with 14/20 and 19/22 joints are supplied with a stopper. For replacement stoppers see CG-3000.
Description:
250ml. Joint size: 24/40. Sidearm Stopcock Type: Valve. Lower outlet is a standard taper inner joint and has a CG-561-01, 0-4mm Chem-Cap fluoropolymer resin plug. Top outer joint is the same size as the lower inner joint.
Description:
50mL Single Neck, standard taper outer 14/20 joint. Design allows the flask to sit upright on the bench and also permits easy access of products with a spatula or policeman. Excellent for controlled evaporation of foaming solvents during rotary evaporation.
Description:
100ml. Joint size: 19/38. Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Flasks with joint sizes other than those listed are available.
Description:
25ml. Joint size: 14/20. Round bottom, HEAVY WALL flask with a standard taper outer joint and a #7 Chem- Thread as a side neck for insertion of thermometers or bleed tubes having an O.D. between 4 and 7mm.
Description:
1000ml. Joint size: Center Neck: 24/40; Side Neck: 24/40. Round bottom, HEAVY WALL, flask with standard taper outer joints on the center and side necks.
Description:
60ml. Joint size: 14/20. Frit O.D; 30; Porosity: Coarse; Sidearm Stopcock Type: Glass. Fritted filter funnel with a choice of coarse or medium porosity fritted disc. Lower outlet is a standard taper inner joint and has a CG-561-01, 0-4mm Chem-Cap fluoropolymer resin plug.
Description:
60ml. Joint size: 19/22. Porosity: M. Buchner style filter funnel having a lower standard taper inner joint and serrated tubulation for connection to a vacuum source. Disc diameters and height above the disc are the same as CG-1402.
Description:
2000ml. Joint size: Center Neck: 24/40; Side Neck: 24/40. European style flask with tapered walls and a shallow hemispherical bottom for more efficient mechanical or magnetic stirring.
Description:
125ml. Overall H: 265mm. Joint size: 14/20. Squibb style separatory funnel with a fluoropolymer resin stopcock. Supplied without stopper. For stoppers see CG-3000. Stopcock bore on all sizes is 2mm.
Description:
2000ml. Joint size: Center Neck: 29/26; Side Neck: 26/26; Thermometer Joint: 10/30. Round bottom, HEAVY WALL, three neck flask with standard taper outer joints on the center neck and vertical side necks.
Description:
5000ml. Joint size: Center Neck: 34/45; Side Necks: 24/40. Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and vertical side necks.
Description:
500ml. Joint size: Center Neck: 24/40; Side Neck: 24/40. Round bottom, HEAVY WALL, flask with standard taper outer joints on the center and side necks.
Description:
12000ml. Joint size: Center Neck: 55/50; Side Necks: 24/40. Round bottom, HEAVY WALL, four neck flask with standard taper outer joints on the center and vertical side necks. Flasks with joint sizes other than those listed are available.
Description:
60ml. Joint size: 14/20. Subdivisions: 1.0ml. Similar to AF-0547 but graduated. The top outer and lower inner joints are the same size. Both stopcocks are equipped with constant pressure retention devices.
Description:
Top Outer Joint: 29/42; Lower Inner Joint: 55/50. Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.
Description:
100mm Schott* Flange, CN 29/42, 3-SN 24/40 Vertical, 1-SN 24/40 Angled 10 deg. Four side necks are vertical and one neck has a 10 deg degree angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring
Description:
Top Outer Joint: 10/30; Lower Inner Joint: 14/20. Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.
Description:
250ml. Joint size: Center Neck: 29/42; Side Necks: 24/40. Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and 20[degree] angled side necks.
Description:
250ml. Joint size: 24/40. Subdivisions: 5.0ml; Stopcock Size: 2. Cylindrical shaped separatory funnel having a lower standard taper inner joint and a top outer joint, both being the same size.
Description:
30ml. Joint size: 24/40. Porosity: C. Buchner style filter funnel having a lower standard taper inner joint and serrated tubulation for connection to a vacuum source. Disc diameters and height above the disc are the same as CG-1402.
Description:
Replacement Components. Receiving Flask, 24/40, 250ml. Cow-type design having three receivers 45[degree] apart. Condensers with lower drip tip inner joints will protrude into the spherical section, permitting the distillate to fall directly into the receiving flasks.
Description:
Complete Item. 50ml. HxW: 413x160mm. Joint size: 24/40. Radial style distillation receiver allows four flasks to be progressively filled. Upper vacuum adapter is bent at a 105[degree] angle.
Description:
Tubing O.D.xWall: 22x1.8mm; OAL Length: 16in. Joint size: 24/40. Type: Inner. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.
Description:
Replacement components for 24/40 size. Vacuum Adapter Only, 24/40. Radial style distillation receiver allows four flasks to be progressively filled. Upper vacuum adapter is bent at a 105[degree] angle.
Description:
H: 55mm. Joint size: 19/22. Allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection has a O.D. of 10mm at the largest serration.
Description:
60. Disc O.D: 60; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.
Description:
With standard taper top outer and lower inner joints with sealed in drip tip. Adapter is bent at a 105º angle for use in vacuum distillation. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.
Description:
70. Disc O.D: 70; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.
Description:
Top Outer Joint: 14/35; Lower Inner Joint: 24/40. Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.
Description:
Joint size: 29/42. Chem-Thread Size: #18; Accepts O.D; 14-18mm; O-Ring Size: 208. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.
Description:
Similar to CG-10009 but without the heating element. For use as a heat or cold shield on Chemglass jacketed reactors. Insulating jacket is made from a heavy fiberglass fabric on the inside with a silicone-coated fiberglass fabric on the outside. Mantle is slit lengthwise to a hole in the bottom center with lacing closure to accommodate a bottom drain valve. 15L
Description:
100ml. Joint size: Center Neck: 19/22; Side Neck: 14/20. Round bottom, HEAVY WALL two neck flask with standard taper outer joints on both the center neck and angled side neck. Flasks with 10/30 side neck are for use with CG-3506 thermometers.
Description:
100ml. Joint size: 24/40. Valve Size: 0-4mm. Round bottom single neck flask having a standard taper outer joint with a CHEM-CAP valve as the sidearm. Plug may be removed for sampling from flask while a purge of inert gas is maintained thru the sidearm.
Description:
500ml. H: 190mm. Valve Size: 0-8mm. Storage flask sidearm has a 9mm O.D. tubulation for use with 3/8in. Cajon connections. Chem-Cap valve is used to control gas or liquid flow into the vessel.
Description:
Tubing O.D.xWall: 41x2.0mm; OAL Length: 16in. Joint size: 45/50. Type: Drip. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.
Description:
50ml. Joint size: 14/20. Stopcock Type: Glass. Round bottom single neck flask having a standard taper outer joint. Available with a 2mm glass stopcock having a constant pressure retaining device or an all fluoropolymer resin AIRFREE valve.
Description:
fluoropolymer resin Stopcock. 10ml. HxW: 290x105mm. Joint size: 24/40. Modified Dean Stark trap allows for more efficient cooling and separation of the azeotrope during distillation. Graduated from 0 to 10ml in 0.1ml subdivisions.
Description:
Joint size: Center Neck: 45/50; Side Necks: 24/40. Flange I.D; 200mm. Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
Description:
ChemRxnHub* TRIPLE Support Stand only, designed to fit into most benchtop hoods, provides support for the Reaction Vessel(s), Glassware, Overhead Stirring Motor, and Temperature Monitor, includes removable spill tray
Print…
List View
Easy View
