Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
The adapters come in standard joint sizes that are compatible with most equipment. Used in reaction systems to regulate the flow of gases or liquids, adapters are typically fabricated from high-quality borosilicate glass for tight connections with other glassware. Offered in a variety of different joints and flange shapes, the right adapter for specific systems is easy to find. Adapters may include tube connectors to use in pressure or vacuum apparatus.
Description:
Tubing O.D.xWall: 28x2.0mm; OAL Length: 12in. Joint size: 24/40. Type: Outer. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.
Description:
Tubing O.D.xWall: 54x2.4mm; OAL Length: 16in. Joint size: 55/50. Type: Outer. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.
Description:
Tubing O.D.xWall: 54x2.4mm. Joint size: 50/50. Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.
Description:
Tubing O.D.xWall: 38x2.0mm. Joint size: 34/45. Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.
Description:
Joint size: 14/20. Stopcock Type: Valve. Converts standard flasks and other apparatus to Airfree applications. With top outer and lower inner standard taper joints, both being the same size.
Description:
REPLACEMENT FLUOROPOLYMER RESIN CONES. Accepts I.D; 5.5mm; Color: Brown. Made entirely of fluoropolymer resin. Supplied complete with a series of 5 all fluoropolymer resin ferrule style cones. These cones have inside diameters that run from 3.5 to 6.
Description:
Joint size: 24/40. Length Below Joint: 200mm. Allows introduction of reactants below the interior surface. Hose connection has a O.D. of 10mm at the largest serration and is bent downward at a 90[degree] angle to the inner joint.
Description:
Top Outer Joint: 29/42; Lower Inner Joint: 34/45. Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.
Description:
Tubing O.D.xWall: 25x1.5mm; OAL Length: 16in. Joint size: 24/40. Type: Outer. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.
Description:
HxW: 210x50mm. Joint size: 14/20. With standard taper top outer and lower inner joints with sealed in lower tube extending below inner joint. Tubing extends 100mm below the joint on the 14/20 and 19/22 sizes and 200mm on the 24/40, 29/26 and 29/42 sizes.
Description:
Joint size: lower: 29/26. Pluro-Stopper Size: #3; Fits Funnel Capacity: 15 to 150ml. Adapters are used for reduced pressure filtration using plain stem buchner funnels. Top is tooled to accept the listed size of pluro-stopper. Serrated hose connection has an O.D.
Description:
24/40 Joint , 100mm. Adapter used to construct a simple moisture trap. Add a condenser to the top outer joint and a graduated funnel to the lower inner joint. Adapters with larger center to center spacing can be used with process reactors and larger flasks up to 50L
Description:
Joint size: 24/40. Length Between Joints: 175mm. Used to expand the length of apparatus. Adapter can also be used as an air condenser. With standard taper top outer and lower inner joint.
Description:
H: 100mm. Joint size: 29/42. Allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection has a O.D. of 10mm at the largest serration.
Description:
Joint size: 29/42. Chem-Thread Size: #15; Accepts O.D; 12-15mm; O-Ring Size: 206. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.
Description:
Top Outer Joint: 55/50; Lower Inner Joint: 45/50. Used to connect dissimilar standard taper joint sizes. Lower inner joint is smaller in size than the top outer joint.
Description:
H: 105mm. Joint size: 24/40. Adapter is inserted between the flask and condenser in a distillation set up and is used for additions to reactions with a syringe pump without having to bend the needle or cannula. Supplied complete with one each CG-3022-05 rubber septa.
Description:
Top Outer Joint: 55/50; Lower Inner Joint: 24/40. Used to connect dissimilar standard taper joint sizes. Lower inner joint is smaller in size than the top outer joint.
Description:
H: 86mm. Joint size: 24/40. Allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection has a O.D. of 10mm at the largest serration.
Description:
Complete Apparatus. Inlet Feed Adapter, Fritted, 19/38. Adapter eliminates the need for a separate filtration step to remove drying agents for other particulate matter from organic solutions prior to rotary evaporation.
Description:
H: 50mm. Joint size: 14/20. Adapter has a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 4 and 7mm. Supplied complete with a Celcon compression cap and Viton o-ring.
Description:
Top Outer Joint: 24/40; Lower Inner Joint: 29/26. Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.
Description:
H: 105mm. Joint size: 29/42. Adapter has an extra coarse disc between the serrated hose connection and the inner joint. Fritted disc prevents solids from being introduced into the system. Hose connection has a O.D. of 10mm at the largest serration.
Description:
Top Outer Joint: 19/38; Lower Inner Joint: 24/40. Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.
Description:
Joint size: 24/40. Glass stopcock. Allows vessels to be flushed with inert gas while sampling directly thru bore of 'T'-bore stopcock. Available with a 4mm glass stopcock having a constant pressure retention device or 4mm bore 1-5 taper fluoropolymer resin plug. The 9x1.
Description:
EVAPORATOR BUMP TRAPS. Connector to Fit 22-400 Vials. Adapter which permits the connection of standard laboratory dram vials directly to the vapor tube or a bump trap of a rotary evaportor. Adapter has a top outer joint of the listed size and a 20-400 G.P.I.
Description:
H: 65mm. Joint size: 14/20. Adapter has an extra coarse disc between the serrated hose connection and the inner joint. Fritted disc prevents solids from being introduced into the system. Hose connection has a O.D. of 10mm at the largest serration.
Description:
Joint size: 24/40. Stopcock Type: Glass. Converts standard flasks and other apparatus to Airfree applications. With top outer and lower inner standard taper joints, both being the same size.
Description:
Adapter with a choice of full or medium length joints & when placed between the distilling flask & columm prevents splash-ups. Overall height is minimal to aid in effective distillation
Description:
Joint size: 35/20. Flow control adapter for use with CG-1198 and CG-1199 chromatography columns along with CG-1200 reservoir. Adapter has a 0-4mm Chem-Cap metering plug.
Description:
Joint size: 29/42. Chem-Thread Size: #9; Accepts O.D; 7-9mm; O-Ring Size: 110. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.
Description:
Allows for 1/8in O.D. PTFE tubing to be connected to glassware via a std taper joint. Useful with vacuum manifolds or any other air sensitive transfer applications
Description:
Style 'B'. From #15 O-ring Joint to: 10mm O.D. serrated hose conn. Adapters for use with AF-0060 and AF-0061 manifolds that permit the manifold to be utilized with a multitude of standard glassware or tubing products.
Description:
Adapter has an outer luer joint that provides a convenient way to connect solid phase extraction (SPE) catriges, tubes or syringes to a standard taper inner joint. 14/20 Inner.
Description:
HxW: 115x50mm. Joint size: 29/26. Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm and is supplied complete with a CG-423 retaining clip. Hose connection has an O.D. of 8mm at the middle serration.
Description:
100ml. Joint size: Lower Inner: 24/40. Reservoir for use with CG-1192 and CG-1193 columns. Reservoir has a top 24/40 standard taper outer joint for use with CG-1195 flow controller, and the listed size lower inner joint.
Description:
Joint size: 24/40. Hose Connection Size: 8.5mm; Style: B. Adapters for use with manifolds such as AF-0450 through AF-0454 to permit port connection to standard rubber hose. Adapters have hooks just below the grind for use with CG-110 stainless steel springs.
Description:
HxW: 105x50mm. Joint size: 19/22. With standard taper top outer and lower inner joints with sealed in drip tip. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.
Description:
Tubing O.D.xI.D; 7.5x2.0mm. Outer joint manufactured to the same specifications found on medical and research syringes. Complies with Federal Specification CG-S-921b and USAST Standard Z70.1. Available tooled on three tubing sizes.
Description:
1000ml. Joint size: Lower Inner: 24/40. Reservoir for use with CG-1192 and CG-1193 columns. Reservoir has a top 24/40 standard taper outer joint for use with CG-1195 flow controller, and the listed size lower inner joint.
Description:
Joint size: 14/20. Chem-Thread Size: #9; Accepts O.D; 7-9mm; O-Ring Size: 110. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.
Description:
Lower Inner Joint: 24/40; Top Outer Joint: 10/30. Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.
Description:
Joint size: 24/40. Stopcock Type: Glass. Adapter has a 'T'-bore stopcock permitting vessels having a standard taper outer joint to be purged and evacuated.
Description:
HxW: 48x60mm. Joint size: 19/22. Adapter has two hose connections 180[degree] from one another to permit a flow of inert gas over the apparatus. Hose connection has an O.D. of 10mm at the largest serration.
Description:
Tubing O.D.xWall: 38x2.0mm; OAL Length: 16in. Joint size: 34/45. Type: Outer. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.