Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
Description:
Sparger, Fritted, 5 mL (2000/3000) with 1/2" mount These U-shaped spargers are specially designed for use with Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers.
Description:
[standard taper] Joint; 34/45. Shaft, (mm); 10. Approx. OAL, (mm); 150 Threaded glass ground joint bearings seal against the stirrer shaft by means of a TFE o-ring, a precision bore PTFE sleeve bearing and a PTFE tightening screw with lock nut and washer.
Description:
Sparger, Fritted, 5 mL, Left Stem (2000/3000) These U-shaped spargers are designed for use with the Tekmar Purge and Trap Concentrators when using either the AQUATek 50 or ALS 2050 vial auto-samplers.
Description:
[standard taper] Joint; 24/40. Use With Shaft O.D. (mm); 10. Approx. Overall Length (mm); 120 Stirrer bearing with built-in lubricant reservoir honed for a 10 mm O.D. shaft. Unit has integral [standard taper] joint for use with a variety of flasks.
Description:
[standard taper] Joint; 29/42. Shaft, (mm); 19. Approx. OAL, (mm); 135 These solid PTFE stirrer bearings are ideal for use with Kontes series 786500 glass 10 mm precision ground stirring shafts and series 784010 glass 19 mm precision ground stirring shafts.
Description:
O-I Number; 209015 Sparger, Fritted, 5 mL, 18 mm O.D. Neck These U-shaped spargers are designed for use with O-I Analytical Purge and Trap Sample Concentrators. Fritted spargers are recommended for potable water and wastewater samples.
Description:
Sparger, Fritted, 25 mL (2000/3000) with 1/2" mount These U-shaped spargers are specially designed for use with Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers.
Description:
[standard taper] Joint; 24/40. Shaft, (mm); 10. Approx. OAL, (mm); 150 Threaded glass ground joint bearings seal against the stirrer shaft by means of a TFE o-ring, a precision bore PTFE sleeve bearing and a PTFE tightening screw with lock nut and washer.
Description:
Dscription; Sparger, Needle, 5 mL Needle spargers are recommended for purge and trap analysis of slurries, soils, viscous liquids and foaming liquid samples. These spargers are also used for headspace sweep analysis of volatile compounds in oils.
Description:
O-I Number; 209031 Sparger, Fritted, 25 mL, 18 mm O.D. Neck These U-shaped spargers are designed for use with O-I Analytical Purge and Trap Sample Concentrators. Fritted spargers are recommended for potable water and wastewater samples.
Description:
Sparger, Fritless, 25 mL (2000/3000) with 1/2" mount These U-shaped spargers are specially designed for use with Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers.
Description:
Sparger, Fritless, 5 mL (2000/3000) with 1/2" mount These U-shaped spargers are specially designed for use with Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers.
Description:
Dscription; Sparger, Fritted, 5 mL These U-shaped spargers are designed for use on the Tekmar 2000 and 3000 Purge and Trap Concentrators when doing EPA Method 603 and using either an AQUATek 50 or ALS 2050 Vial Autosampler.
Description:
Coupling for 10 mm shafts The Flex-Coupling allows 10 mm glass stirring rods to be used with a motor drive. The coupling uses a 3" long epoxy-coated spring to compensate for misalignment, reduces the chance of breakage and eliminates the need for special adapters.
Description:
Dscription; Sparger, Fritted, 25 mL These U-shaped spargers are designed for use on the Tekmar 2000 and 3000 Purge and Trap Concentrators when doing EPA Method 603 and using either an AQUATek 50 or ALS 2050 Vial Autosampler.
Description:
[standard taper] Joint; 24/40. Shaft, (mm); 10. Approx. OAL, (mm); 130 These solid PTFE stirrer bearings are ideal for use with Kontes series 786500 glass 10 mm precision ground stirring shafts and series 784010 glass 19 mm precision ground stirring shafts.