Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
The Equipment & Instrument Service Team’s focus is to provide comprehensive service solutions for our customers. We provide validation, calibration, preventative maintenance, and extended warranties on all equipment & instruments in and around the laboratory.
Description:
1000ml. Joint size: Center Neck: 29/42; Side Neck: 29/42. Round bottom. HEAVY WALL three neck flask with standard taper outer joints on the center and side necks. Indentations increase agitation of the contents of the flask during stirring.
Description:
250ml. H: 160mm. Valve Size: 0-4mm. Storage flask sidearm has a 9mm O.D. tubulation for use with 3/8in. Cajon connections. Chem-Cap valve is used to control gas or liquid flow into the vessel.
Description:
200ml. Joint size: 24/40. Frit O.D; 40; Porosity: Coarse; Sidearm Stopcock Type: Glass. Fritted filter funnel with a choice of coarse or medium porosity fritted disc. Lower outlet is a standard taper inner joint and has a CG-561-01, 0-4mm Chem-Cap fluoropolymer resin plug.
Description:
100ml. Joint size: 29/26. Auger Size: A. Facilitates the delivery of free flowing, granular solids into reactions. Pressure equalizing arm is eqiupped with a vented stopper for air-free operations and also permits access into the delivery stem for easy clean-out.
Description:
5000ml. Joint size: Center Neck: 45/50; Side Neck: 24/40. Round bottom, HEAVY WALL, three neck flask with standard taper outer joints on the center and side necks. Lower outlet is a CG-424-05, 4mm straight bore fluoropolymer resin stopcock.
Description:
Stem O.D.xLength: 22x100mm. Design of funnel permits addition of solvents to flash chromatography columns without disturbing the silica-gel / packing layer. Lower end of the funnel is closed and the stem has a series of small holes through which the solvent drains.
Description:
Capacity: 30mL. Joint size: 24/40. Porosity: Medium. With a lower standard taper inner joint and serrated tubulation for connection to a vacuum source.
Description:
500ml. Joint size: Center Neck: 45/50; Side Neck: 29/42. Round bottom. HEAVY WALL three neck flask with standard taper outer joints on the center and side necks. Indentations increase agitation of the contents of the flask during stirring.
Description:
125ml. Joint size: 29/42. Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Flasks with joint sizes other than those listed are available.
Description:
Squibb sep funnel with a PTFE* stopcock. Made entirely of TFE, the stem attaches directly to the glass stopcock without o-rings or other gaskets. 45/50 Stopper, 6L Capacity, PTFE Stopcock 10mm
Description:
Complete Apparatus. HxW: 695x435mm. Modified Abderhalden drying apparatus with a 57mm flat o-ring connection between the desiccant flask and the drying chamber to permit easy sample removal after drying. The drying chamber has an I.D. of 2in. and is 8in.
Description:
2000ml. Joint size: Center Neck: 34/45; Side Necks: 24/40. Round bottom, HEAVY WALL, four neck flask with standard taper outer joints on the center and vertical side necks. Flasks with joint sizes other than those listed are available.
Description:
50ml. H: 120mm. Valve Size: 0-4mm. Storage flask sidearm has a 9mm O.D. tubulation for use with 3/8in. Cajon connections. Chem-Cap valve is used to control gas or liquid flow into the vessel.
Description:
12000ml. Joint size: Center Neck: 45/50; Side Necks: 29/42. Round bottom, HEAVY WALL, four neck flask with standard taper outer joints on the center and vertical side necks. Flasks with joint sizes other than those listed are available.
Description:
3000ml. Joint size: Center Neck: 29/42; Side Neck: 24/40. Round bottom. HEAVY WALL three neck flask with standard taper outer joints on the center and side necks. Indentations increase agitation of the contents of the flask during stirring.
Description:
HxW: 165x105mm. Joint size: 29/42. Thermometer Joint Size: 10/30. Adapter has a standard taper outer joint at the top of the main tube for use with jointed thermometers.
Description:
Distillation Apparatus, Complete, 500ml. Apparatus for use in distillation of material such as THF or ether. Storage reservoir has a capacity of 125 or 500ml. Extremely efficient cold finger coil condenser has a section that is immersed into the distillate.
Description:
Joint size: Center Neck: 45/50; Side Necks: 29/42. Flange I.D; 200mm. Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
Description:
Joint size: Center Neck: 24/40; Side Necks: 24/40. Flange I.D; 150mm. Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The #7 Chem-Thread will allow a thermometer or bleed tube having an O.D. of 4 to 7mm O.D.
Description:
Lower Inner Joint: 19/38; Top Outer Joint: 14/35. Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.
Description:
Tubing O.D.xWall: 16x1.2mm. Joint size: 12/30. Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.
Description:
Replacement Components. fluoropolymer resin Tubing, 1/8in.x24in. Long. Two piece cold trap style condenser for use with rotary evaporators.
Description:
Kjeldahl shape for heating and stirring and permitting easy transfer of liquids or solids. Lower portion of flask fits standard heating mantles. Volume: 10mL. Joint size: 14/20. With 2mm glass stopcock, constant pressure retaining device, fluoropolymer resin AIRFREE valve.
Description:
HxW: 130x30mm. Joint size: 29/26. Used to regulate the flow of gases or liquids into reaction systems. fluoropolymer resin stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration.
Description:
15. Disc O.D; 15; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.
Description:
2000ml. Flange I.D; 150mm; Body O.DxH: 160x205mm. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.
Description:
90. Disc O.D: 90; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.
Description:
50ml. Joint size: 14/20. Valve Size: 0-4mm. Cylindrical shaped tube useful for storage or simple reactions. With standard taper inner joint at the top and a Chem-Cap valve as the sidearm.
Description:
150mm Schott* Flange, CN 29/42, 3-SN 29/42 Vertical, 1-SN 29/42 Angled 10 deg. Four side necks are vertical and one neck has a 10 deg degree angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
Description:
Joint Type: Socket; Tube O.D; 34mm. Special S-40 size ball and sockets for use in repairing Buchi rotary evaporator components. Both the ball and socket are tooled on Duran 34mm O.D.x2.8mm wall tubing.
Description:
2000ml. Flange I.D; 150mm; Body O.DxH: 160x205mm. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring.
Description:
HxW: 130x50mm. Joint size: 29/42. Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm and is supplied complete with a CG-423 retaining clip. Hose connection has an O.D. of 8mm at the middle serration.
Description:
350ml. H: 240mm. Valve Size: 0-8mm. Storage vessel with a #15 o-ring joint on the sidearm and a Chem-Cap valve to control gas or liquid flow into the vessel.
Description:
Joint size: Center Neck: 45/50; Side Necks: 45/50. Flange I.D; 200mm. Three neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface to allowing it to be greased or used with an o-ring.
Description:
80. Disc O.D: 80; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.
Description:
Joint size: 24/40. Frit O.D; 40mm; Porosity: Coarse; Stopcock Type: Glass. Similar to AF-0544, but with the addition of two 2mm glass stopcocks with constant pressure retension devices or all fluoropolymer resin AIRFREE valves at either end of the tube.
Description:
200ml. Joint size: 24/40. Frit O.D; 40; Porosity: Coarse; Sidearm Stopcock Type: Valve. Fritted filter funnel with a choice of coarse or medium porosity fritted disc. Lower outlet is a standard taper inner joint and has a CG-561-01, 0-4mm Chem-Cap fluoropolymer resin plug.
Description:
Lower Inner Joint: 29/42; Top Outer Joint: 19/38. Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.
Description:
Kjeldahl shape for heating and stirring and permitting easy transfer of liquids or solids. Lower portion of flask fits standard heating mantles. Volume: 200mL. Joint size: 14/20. With 2mm glass stopcock, constant pressure retaining device, fluoropolymer resin AIRFREE valve.
Description:
90. Disc O.D: 90; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.
Description:
Tubing O.D.xWall: 32x2.4mm. Joint size: 29/42. Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.
Description:
I.D; 20mm; Tube O.D; 25mm. O-Ring Size: 214; Clamp Size: 35. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Description:
fluoropolymer resin Stopcocks. HxW: 550x325mm. Joint size: 24/40. Thermometer Joints: 10/30. Jacketed fractionation distilling head for use under vacuum. The 10/18 top outer joint is for a 1in. immersion thermometer while the 10/30 joints are for a 2in.