Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
Stirrers are used ubiquitously in laboratories for simple mixing procedures with solutions of varying viscosities and heating needs. Hotplate varieties bring solutions up to heat quickly and efficiently, and powerful magnets in automatic stirrers deliver reliably consistent performance for all samples. Stirring rods and powered stirring units are all built of durable materials and deliver long-lasting performance under regular or continuous use. Surfaces are easy to clean for low maintenance concerns.
Description:
Dscription; Sparger, Fritted, 5 mL These U-shaped spargers are designed for use on the Tekmar 2000 and 3000 Purge and Trap Concentrators when doing EPA Method 603 and using either an AQUATek 50 or ALS 2050 Vial Autosampler.
Description:
Sparger, Fritless, 5 mL (2000/3000) with 1/2" mount These U-shaped spargers are specially designed for use with Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers.
Description:
Sparger, Fritless, 25 mL (2000/3000) with 1/2" mount These U-shaped spargers are specially designed for use with Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers.
Description:
Complete with glass shaft and bearing. Blade is PTFE. Assembly designed for use with flask holding a volume of 500-5000ml and having a Standard Taper 24/40 joint. Approximate overall dimensions are 445Lx75Wmm with a 10mm shaft OD.
Description:
Dscription; Sparger, Fritted, 25 mL These U-shaped spargers are designed for use on the Tekmar 2000 and 3000 Purge and Trap Concentrators when doing EPA Method 603 and using either an AQUATek 50 or ALS 2050 Vial Autosampler.
Description:
Stir Bar, X-shaped magnetic, PTFE-covered, Width: 1 1/4in, Fits Reservoir: 5 L, 10 L, 20 L, More turbulence with less vibration than straight stir bars, Autoclavable, all-purpose, permits stirring in closed containers without contamination, for conical bottom HPLC reservoir
Description:
fluoropolymer resin Spin Vanes have cross-mounted molded-in magnetic bars for V-Vials. These exceptionally sturdy vials have a conical interior bottom that provides total downward drainage for maximum retrieval of contents by syringe or micropipette.
Description:
[standard taper] Joint; 24/40. Shaft, (mm); 10. Approx. OAL, (mm); 130 These solid PTFE stirrer bearings are ideal for use with Kontes series 786500 glass 10 mm precision ground stirring shafts and series 784010 glass 19 mm precision ground stirring shafts.
Description:
[standard taper] Joint; 24/40. Shaft, (mm); 10. Approx. OAL, (mm); 150 Threaded glass ground joint bearings seal against the stirrer shaft by means of a TFE o-ring, a precision bore PTFE sleeve bearing and a PTFE tightening screw with lock nut and washer.
Description:
Sparger, Fritted, 25 mL (2000/3000) with 1/2" mount These U-shaped spargers are specially designed for use with Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers.
Description:
Stir Bar, X-shaped magnetic, PTFE-covered, Width: 1in, Fits Reservoir: 2 L, More turbulence with less vibration than straight stir bars, Autoclavable, all-purpose, permits stirring in closed containers without contamination, for use with conical bottom HPLC reservoir
Description:
KIMAX* Large Rod Tubing, Approximate 1 inch (25.4 mm) OD, Approximate 0.428 pounds per foot. Cut only end finish, Approximate 18 pieces per case. Corrugated packaging. Pounds per case 30. Lengths are 48" ±1/4".
Description:
Sparger, Fritted, 5 mL, Left Stem (2000/3000) These U-shaped spargers are designed for use with the Tekmar Purge and Trap Concentrators when using either the AQUATek 50 or ALS 2050 vial auto-samplers.
Description:
[standard taper] Joint; 24/40. Use With Shaft O.D. (mm); 10. Approx. Overall Length (mm); 120 Stirrer bearing with built-in lubricant reservoir honed for a 10 mm O.D. shaft. Unit has integral [standard taper] joint for use with a variety of flasks.
Description:
Sparger, Fritted, 5 mL (2000/3000) with 1/2" mount These U-shaped spargers are specially designed for use with Tekmar 2000 and 3000 Purge and Trap Concentrators and with the 2016 and 2032 Autosamplers.
Description:
[standard taper] Joint; 34/45. Shaft, (mm); 10. Approx. OAL, (mm); 150 Threaded glass ground joint bearings seal against the stirrer shaft by means of a TFE o-ring, a precision bore PTFE sleeve bearing and a PTFE tightening screw with lock nut and washer.
Description:
O-I Number; 209015 Sparger, Fritted, 5 mL, 18 mm O.D. Neck These U-shaped spargers are designed for use with O-I Analytical Purge and Trap Sample Concentrators. Fritted spargers are recommended for potable water and wastewater samples.
Description:
[standard taper] Joint; 29/42. Shaft, (mm); 19. Approx. OAL, (mm); 135 These solid PTFE stirrer bearings are ideal for use with Kontes series 786500 glass 10 mm precision ground stirring shafts and series 784010 glass 19 mm precision ground stirring shafts.
Description:
Coupling for 10 mm shafts The Flex-Coupling allows 10 mm glass stirring rods to be used with a motor drive. The coupling uses a 3" long epoxy-coated spring to compensate for misalignment, reduces the chance of breakage and eliminates the need for special adapters.
Description:
[standard taper] Joint; 24/40. Use With Shaft O.D. (mm); 10. Hose Connections; #2. Approx. Overall Height (mm); 105 Water cooled bearing with a built-in lubricant reservoir for use with a 10 mm O.D. shaft.
Description:
KIMAX* Small Rod Tubing, Approximate 8mm OD, Approximate 0.075 pounds per foot. Cut only end finish, 85 pieces per case. Corrugated packaging. Pounds per case 25. Lengths are 48" ±1/4".
Description:
The Wheaton Overhead Stirrer is a compact unit with solid state speed control capable of providing RPM/torque combinations for most laboratory operations such as homogenizing or mixing.
Description:
Dscription; Sparger, Needle, 5 mL Needle spargers are recommended for purge and trap analysis of slurries, soils, viscous liquids and foaming liquid samples. These spargers are also used for headspace sweep analysis of volatile compounds in oils.
Description:
O-I Number; 209031 Sparger, Fritted, 25 mL, 18 mm O.D. Neck These U-shaped spargers are designed for use with O-I Analytical Purge and Trap Sample Concentrators. Fritted spargers are recommended for potable water and wastewater samples.
Description:
Item; V Stir Bars, 4x12 mm, 2 per vial These MICROFLEX Kits feature the patented chaste connectors and specially tooled glassware components providing great versatility.
Stirrers
Print…
List View
Easy View
