Easy access to products and protocols for research use only in the identification of 2019-nCoV based on Centers for Disease Control and Prevention (CDC) recommendations
So much has changed during this unprecedented time, except your ability to count on Avantor. We continue to set science in motion to create a better world by providing you with the right solutions to keep moving forward.
Our solutions, developed with you as our focus, are crafted by our team and network of professionals with advanced degrees in science, quality control, engineering, manufacturing and industry experience.
Avantor supports end-to-end fluid management solutions – including peristaltic pumps and aseptic fluid transfer solutions – that are reliable and customer-centric, helping bioprocessing manufacturers meet their research and production goals.
A strong, vibrant research and development group is the lifeblood of all industries. VWR will support you from the latest life science products to the guaranteed purity of organic building blocks...
VWR is ready to support your production facility with reliable access to raw materials and essential supplies. We can also help you increase productivity...
VWR is proud of our years of experience providing choice and excellent service to the Industrial market from Food & Beverage, Petrochemical, Environmental Testing, Waste Water, Cosmetics, Consumer Goods, Agriculture and more...
VWR is your complete source for workplace supplies. Binders, calendars, pens, cleaning and sanitation supplies, and office equipment are just some of the essential products we offer...
New Avantor® J.T.Baker® premium conductive and non-conductive robotic tips deliver superior quality and reliable performance for results you can trust.
Avantor Services provides a wide range of specialized services and digital solutions to help you solve complex challenges.
We’ve built our reputation on consistent, comprehensive mastery of day-to-day operations, allowing lab, clinical, and production environments to focus their high-value resources on core scientific priorities.
As our customers’ needs have evolved, so have our capabilities. We have become experts in scientific operations, improving performance with sophisticated solutions and providing guidance on best practices.
You can select and customize services for peak efficiency, quality, and accelerated innovation.
Description:
Rigid, leakproof design. High-density polyethylene bottles with polypropylene closures. Wide mouth. Easy storage and sampling of light sensitive materials. Comply with U.S. Pharma 23 requirements for light transmission. Recycling code molded in base.
Description:
Low profile. Magnetically driven by placing it on top of adjustable speed magnetic stirrer. Designed to hold four microtiter plates or two large culture flasks. Orbit diameter: 1.5mm. Weight holding capacity of 1.36kg. Dimensions: 22.5Wx22.5Dx5.3Hcm.
Description:
Made of high-density polyethylene with polypropylene closures. Ideal for packaging and storing of liquids and solids. Rigid, leakproof design. Size: 125mL.
Description:
Translucent, leak proof design, flexible and easy to fill wide mouth bottles. Made of FDA compliant material, ideal for general storage of liquids and powders. Low-density polyethylene with matched polypropylene closures. Recycling code molded into base.
Description:
Rigid, leak proof design with easy to fill, wide mouths. These high-density polyethylene Precisionware* bottles with polypropylene closures are ideal for packaging and storing of liquids and solids. Recycling code molded into bottle.
Description:
Rigid, leak proof design with easy to fill, wide mouths. These high-density polyethylene Precisionware* bottles with polypropylene closures are ideal for packaging and storing of liquids and solids. Recycling code molded into bottle.
Description:
For handling and temporary storage of liquid wastes awaiting proper disposal. Screw-on top has a funnel-like flare, 12cm diameter. Snap-on cap. Translucent, high density polyethylene jug measures 27.3Wx24.7Dx42.5Hcm. Graduated, with a 20.8L capacity. Throat opening: 6.3cm.
Description:
Provide secure closure for top of autoclave bag, yet allow release of internal pressure that develops during autoclave cycle. Clip stays on bag for final disposal. Suitable for benchtop bags or small size bags up to 48.3x58.4cm. Not for use with larger bags.
Description:
Unbreakable polyethylene straight tubes, 16mm I.D. x 19mm O.D. (5/8"x 3/4"). Each tube is supplied with two polypropylene fittings which accept 6.4 to 9.5mm (1/4" to 3/8") I.D. tubing. Drying agent not included.
Description:
Molded polypropylene; rigid, strong and smooth. Steam autoclavable at 121[degree]C (250[degree]F). Special prices on yearly contracts for large runs and colors on request.
Description:
With medium porosity removable plate. Made of high density polyethylene 6.4mm thick with non-porous ring at periphery of plate which seals filter paper when used. 457mm inside diameter, 292mm overall height, 229mm rim to plate.
Description:
Ergonomic hand held capping device fits in the palm of yor hand, allowing you to cap polypropylene test tubes while eliminating sore fingers and hands.
Description:
Scienceware, extra-large desiccator, clear polycarbonate, max shelf wt. 10lbs, exterior dims: 26 x 24 x 26in, interior capacity: 3.6 cu. ft., included desiccant in a pre-programmed module, 120V
Description:
Freezer Box Pop Up 2inch, With 81-place indexed divider, Cryo Storage, Fits standard 2inch freezer storage racks, Withstands temperatures as low as -86degree celcius, Will not stick, warp, or discolor, Reusable, Ships and stores flat, Translucent polypropylene, Holds 81 vials
Description:
Sterileware*Powder Lance, made of virgin, Material: high density polyethylene (HDPE), individually bagged and gamma irradiated sterile, Materials conform to FDA and EU regulations, Ideal for powder samples, Unscrew the tip of the sampler, 950mm, Size: 200ml
Description:
Molded of a special blend of polypropylene that is heavier than water, these racks sink to the bottom of the bath and will not tip over. All sizes are 213 x 110mm wide (8 3/8" long x 4 5/16"). Steam autoclavable at 121[degree] C (250[degree] F).
Description:
large dedicated labeling areas help standardize the way Bottle contents are identified. additional writing area for name and safety information with space for date information.
Description:
Isolates delicate benchtop instruments from vibrations caused by nearby equipment. Vibro-Absorber* damping mounts at each corner support 46lb. mass of platform. Smooth, non-slip neoprene working surface area is 34x27.5cm. Shell made of high impact polystyrene.
Description:
Polypropylene rack is small enough to hold in one hand, and diverse enough to accommodate most vials and small bottles. Dimensions: 128Lx105Wx43Hmm. Contains 12 places. Fits 25mm vials/bottles.
Description:
Stainless steel spoon and spatula ends are coated with brown Fluo-Kem Teflon containing FEP, which complies with FDA regulations governing direct food contact, to provide an anti-stick, corrosion resistant surface.
Description:
Cylindrical pipette baskets with sides that have cut-out hand grips for easy handling. Gusher holes provide quick drainage when lifted from soaking jar, and foam disk on bottom cushions pipette tips to prevent breakage. Polyethylene baskets are 102mm (4") I.D.
Description:
Top I.D. 70mm. Stem O.D. 10mm. Stem Length: 70mm. For non-vacuum high-speed filtration. Molded TPX (polymethylpentene) with helicoid internal ribs. Helicoid ribs prevent paper from sticking to funnel wall. Autoclavable and heat resistant to 177[degree]C.
Description:
Coarse porosity. Height: 292mm. Rim to Plate: 229mm. I.D. 457mm. Filter plate is linear polyethylene. Support grid under plate. Non-porous ring around plate seals filter paper. Porous plates are 6.4mm thick. Vacuum connector. Use below 52[degree]C.
Description:
Unique valve eliminates dangerous chemical drips. Safety labeling indicates chemical name and formula, NFPA codes (Fire Hazard), health hazards, Chemical Abstract System (CAS) number, and more. LDPE bottles with PP closures
Description:
Fast dry ice production on demand. Includes all components to connect to standard LCO2 cylinder with siphon tube. Produces 8-9 blocks of dry ice 8.5x11cm long. Pressure gauge with relief valve. Dry ice contained in a HDPE chamber. Fits US CO2 cylinder standards.
Description:
Supports several sizes of funnels from 25 to 152mm (1inch to 6inch) top diameter. Clamp fits standard support rods, 12.5mm (1/2inch) and includes an adapter to fit to narrower 9.5mm (3/8inch) rods. support rod and other accessories not included in this set
Description:
Enviro-Safe* black liquid, yellow back glass, -10/260c, 1 divisions, 355mm length, 76mm immersion, 0.5c accuracy, includes statement of accuracy traceable to NIST and DKD/PTB and serial number
Description:
Blood bank, enviro-safe* liquid filled, -5/20c, 0.5 divisions, 135mm length, bottle filled with enviro-safe* liquid, 0.5c accuracy, certified at 4c, teflon* coated, includes calibration report and serial number, accuracy traceable to nist
Description:
Incubator, enviro-safe* liquid filled, 15/50c, 0.5 divisions, 135mm length, bottle filled with enviro-safe* liquid, 0.5c accuracy, teflon* coated, includes statement of accuracy traceable to NIST and DKD/PTB and serial number
Description:
For 61cm pipettes. Height: 79cm. For rapid, automatic siphoning and refilling over range of inlet water pressures and flow rates. With 305mm long piece of 2.5cm I.D. drain tube and 1.5m of 12.5mm I.D. of flexible water inlet tube. Octagonal base: 26cm across. Cylinder: 152mm I.D.
Print…
List View
Easy View
